Official eMule-Board: Testing Version 0.51 - Official eMule-Board

Jump to content


  • (7 Pages)
  • +
  • « First
  • 5
  • 6
  • 7

Testing Version 0.51 Continued unofficial development

#121 User is offline   fox88 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 4612
  • Joined: 13-May 07

Posted 13 March 2019 - 09:37 PM

View Postducho, on 10 March 2019 - 09:03 PM, said:

Would it be possible to eMule to start reshashing everything because of Daylight savings changes today ?

Starting from version 0.51a, file timestamp is saved as UTC, which is unaffected with DST changes.
If you run earlier versions, files might be rehashing due to this timestamp difference.

Before that change, I used to have rehashings twice a year.
0

#122 User is offline   fox88 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 4612
  • Joined: 13-May 07

Posted 13 March 2019 - 09:44 PM

View PostCoool, on 13 March 2019 - 04:56 PM, said:

Could not get to work UDP protocol (port) on Windows 7 SP1 Ultimate 32-bit.
eMule v0.51b UDP works.

Please provide detailed description of the problem; preferably with the steps to reproduce the issue.
Otherwise, even the meaning of the word "work" here is unclear.
0

#123 User is offline   Coool 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 11
  • Joined: 25-June 18

Posted 14 March 2019 - 09:35 AM

View Postfox88, on 13 March 2019 - 11:44 PM, said:

View PostCoool, on 13 March 2019 - 04:56 PM, said:

Could not get to work UDP protocol (port) on Windows 7 SP1 Ultimate 32-bit.
eMule v0.51b UDP works.

Please provide detailed description of the problem; preferably with the steps to reproduce the issue.
Otherwise, even the meaning of the word "work" here is unclear.


Go to Options -> Connection -> Test ports redirects to emule-project.net and reports what UDP port failed. Can't connect to Kad network too. Log reports "Failed to bootstrap Kad. Your nodes.dat might be outdated or there is a connection problem." until all nodes is deleted.
0

#124 User is offline   fox88 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 4612
  • Joined: 13-May 07

Posted 14 March 2019 - 11:09 AM

View PostCoool, on 14 March 2019 - 12:35 PM, said:

Go to Options -> Connection -> Test ports redirects to emule-project.net and reports what UDP port failed. Can't connect to Kad network too.

The port test is not 100% reliable.

I did a quick check of KAD connection in a clean installation.

Made sure that configuration would be stored in program's directory.
Got 0.51c binaries from Downloads here.
Unpacked to c:\eMule
Started eMule, completed first run Wizard.
Answered to firewall prompt and allowed eMule.

KAD connected immediately, even though the router has port forwarding blocked.
0

#125 User is offline   Coool 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 11
  • Joined: 25-June 18

Posted 15 March 2019 - 09:37 AM

View Postfox88, on 14 March 2019 - 01:09 PM, said:

View PostCoool, on 14 March 2019 - 12:35 PM, said:

Go to Options -> Connection -> Test ports redirects to emule-project.net and reports what UDP port failed. Can't connect to Kad network too.

The port test is not 100% reliable.

I did a quick check of KAD connection in a clean installation.

Made sure that configuration would be stored in program's directory.
Got 0.51c binaries from Downloads here.
Unpacked to c:\eMule
Started eMule, completed first run Wizard.
Answered to firewall prompt and allowed eMule.

KAD connected immediately, even though the router has port forwarding blocked.


Did all as you said and UDP port is reachable (Test ports) and KAD is working on eMule 0.51c. Is it possible that using eMule 0.51c on USB drive mounted on folder can cause the problem. Or maybe eMule 0.50a PortableApp launcher causes it! Any ideas?! :unsure:
0

#126 User is offline   fox88 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 4612
  • Joined: 13-May 07

Posted 15 March 2019 - 02:24 PM

eMule ran fine from a USB disk.
I did not test it with USB flash, or used any launchers, so cannot tell much here.
0

#127 User is offline   Coool 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 11
  • Joined: 25-June 18

Posted 16 March 2019 - 09:34 AM

View Postfox88, on 15 March 2019 - 04:24 PM, said:

eMule ran fine from a USB disk.
I did not test it with USB flash, or used any launchers, so cannot tell much here.


eMule v0.51b UDP works fine from USB, but v0.51c - don't. You can add additional partition on existing storage and mount it on C:\USB folder. And try run it from C:\USB\Portable\PortableApps\eMulePortable\App\eMule folder. Try out https://portableappz...3-plus-12e.html launcher too. <_<
0

#128 User is offline   fox88 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 4612
  • Joined: 13-May 07

Posted 16 March 2019 - 11:07 AM

View PostCoool, on 16 March 2019 - 12:34 PM, said:

eMule v0.51b UDP works fine from USB, but v0.51c - don't.

What kind of USB?
Any useful information in logs?
Unpacked 0.51c binaries on USB flash drive, port test was successful, ed2k and KAD connected fine.
So in my case USB was not the issue both for disk and flash drives.
If eMule is configured to have "everything in program's directory" and disk drive letter is the same, it is portable without helper applications.

View PostCoool, on 16 March 2019 - 12:34 PM, said:

You can add additional partition on existing storage and mount it on C:\USB folder.

I do not follow where is USB in this complex setup - except directory name.
And why I should be responsible for the behaviour of third-party applications?
0

#129 User is offline   kaworu83 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 5
  • Joined: 04-November 14

Posted 16 March 2019 - 03:23 PM

I have a notebook Acer SP513-51 with intel graphics 520.
No problem with emule version 0.50b beta but with the following versions I have fonts too small.
Can anyone help me?
0

#130 User is offline   Coool 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 11
  • Joined: 25-June 18

Posted 16 March 2019 - 04:08 PM

View Postfox88, on 16 March 2019 - 01:07 PM, said:

...

Happy news. eMule v0.51c UDP works. Removed all launcher stuff. Run eMule program directly. :bouncehi:
0

  • Member Options

  • (7 Pages)
  • +
  • « First
  • 5
  • 6
  • 7

2 User(s) are reading this topic
0 members, 2 guests, 0 anonymous users