W10 Kad Not Connecting
#1
Posted 16 May 2017 - 11:46 PM
When I try to connect to KAD, it just shows connecting. When I try a search, it shows as You are not connected to a server or the KAD network.
I had this working perfectly on W7, but cannot seem to do the same on W10. Any help welcomed.
#2
Posted 17 May 2017 - 03:18 AM
2. Go to Kad, paste the following URL on Nodes.dat from URL http://upd.emule-sec...y.org/nodes.dat and click Bootstrap.
If you're still having problems to connect the Kad network, just do a search using the Global (Servers) method and put some files with a high availability to download.
#3
Posted 18 May 2017 - 06:22 AM
NoMiaus, on 17 May 2017 - 03:18 AM, said:
2. Go to Kad, paste the following URL on Nodes.dat from URL http://upd.emule-sec...y.org/nodes.dat and click Bootstrap.
If you're still having problems to connect the Kad network, just do a search using the Global (Servers) method and put some files with a high availability to download.
#4
Posted 18 May 2017 - 06:31 AM
Now says Connected for KAD
Sources appearing but almost immediately going to stopped
Down=0/Up=0
Any ideas what is happening here ?
Thanks to all
#5
Posted 18 May 2017 - 03:37 PM
#6
Posted 19 May 2017 - 04:28 AM
DJKuhpisse, on 18 May 2017 - 03:37 PM, said:
Please excuse my ignorance - long time since used EM, what does "reset configuration" entail (I seem to remember delete all .dat files ?? I don't wan to lose the downloads I currently have though !). I always used kad only but looks like not so many sources now so can I combine servers with kad and if so how do I set up the servers ?
Apols for newbie questions
#7
Posted 19 May 2017 - 10:56 AM
#8
Posted 20 May 2017 - 03:10 PM
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#9
Posted 21 May 2017 - 10:58 AM
#10
Posted 21 May 2017 - 11:58 AM
1) Have you downloaded emule 0.50a from sourceforge.net?
2) Operating system used? (example: Windows 7 professional SP1 32bit)
3) Which firewalls/antiviruses/spyware detectors are present/installed on your pc?
4) Are you using peerguardian/peerblock/ip filters or similars? And what of those?
5) Name of your ISP, name of your connection and, possibly, their declared downstream and upstream bandwiths
6) How many PCs, in your home network, are using p2p programs (emule or others) and which ports are they using?
7) Screenshot of your Option -> Connections
(OR: Which ports are you using? Is UPNP enabled? What value are present on download/upload capacity/limit? And so forth)
8) Are you running emule as an administrator? yes/no
9) How many servers do you have into your list (it's inside servers tab under emule lightning)?
10) Where do you get the servers from?
11) Number of downloading files (it's inside transfers tab under emule lightning)?
12) Number of shared files (it's inside shared files tab under emule lightning)?
13) Is Protocol Obfuscation enabled (Options -> Security)?
14) Found sources (Statistics tab -> Transfer -> Downloads -> Session -> Found sources)?
15) On queue (Statistics tab -> Transfer -> Downloads -> Session -> Found sources -> On queue)?
16) Did you modify any values in Options -> Extended? And what?
17) What option is ticked in sharing emule with other computer users (Options -> Extended)?
18) Describe how your devices are arranged.
example:
- telephone jack, adsl filter, adsl cable to ethernet modem, ethernet modem, ethernet cable to router, router, 3 pc (1 wireless, 2 wired with ethernet cables)
19) High ID or Low ID? (servers tab, my info on the right: ed2k network, under your numerical ID - kad network: status and udp status)
If you have low ID, and would try to solve it, answer to the following questions too.
20) (not really a question, say only if you know how to do it)
Make sure you know how to reset (to factory defaults) your device and note down the data for connecting to your ISP.
(in case of troubles, you can reset the router and you'll need those data - vpi - vci - username and password of your connection, and so forth...
those data are personal/private, you_SHOULD_NOT_post_them_here --- ONLY_you_should_know_them).
21) Manufacturer and model of your router
22) Screenshots of your router menus are welcome:
- UPNP settings
- DHCP settings
- lan ip clients settings (or: the place where you have reserved an ip address for your PCs, instead of using a static ip for each PC)
- virtual server/port forwarding or similar
- eventual firewall screen (of your router)
23) Have you put static ip to your pc (into tcp/ip properties of your connection properties)?
Here too, a screenshot would be welcome.
If you have reserved an IP address (from your router settings), it is not necessary to set a static IP to your PC.
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#11
Posted 21 May 2017 - 12:30 PM