Low Id With D-Link Dsl 2750E
#1
Posted 21 October 2015 - 05:58 PM
I have a new router D-link DSL2750E .
I Open port forwarding , but low ID
I try UPNP whit new emule 0.50b BETA1 no work too .
Somebody have a solution
Thanks for your helps
.:Aqui Finda Sian Nissart:.
#2
Posted 21 October 2015 - 07:11 PM
Please post (your) screenshots of:
setup - local network - dhcp settings
setup - local network - dhcp reservation lists
advanced - port forwarding
advanced - filtering options - ip filtering
advanced - network tools - port mapping
advanced - nat
And possibly respond to these questions too (skip 21st and 22nd):
1) Have you downloaded emule 0.50a from sourceforge.net?
2) Operating system used? (example: Windows 7 professional SP1 32bit)
3) Which firewalls/antiviruses/spyware detectors are present/installed on your pc?
4) Are you using peerguardian/peerblock/ip filters or similars? And what of those?
5) Name of your ISP, name of your connection and, possibly, their declared downstream and upstream bandwiths
6) How many PCs, in your home network, are using p2p programs (emule or others) and which ports are they using?
7) Screenshot of your Option -> Connections
(OR: Which ports are you using? Is UPNP enabled? What value are present on download/upload capacity/limit? And so forth)
8) Are you running emule as an administrator? yes/no
9) How many servers do you have into your list (it's inside servers tab under emule lightning)?
10) Where do you get the servers from?
11) Number of downloading files (it's inside transfers tab under emule lightning)?
12) Number of shared files (it's inside shared files tab under emule lightning)?
13) Is Protocol Obfuscation enabled (Options -> Security)?
14) Found sources (Statistics tab -> Transfer -> Downloads -> Session -> Found sources)?
15) On queue (Statistics tab -> Transfer -> Downloads -> Session -> Found sources -> On queue)?
16) Did you modify any values in Options -> Extended? And what?
17) What option is ticked in sharing emule with other computer users (Options -> Extended)?
18) Describe how your devices are arranged.
example:
- telephone jack, adsl filter, adsl cable to ethernet modem, ethernet modem, ethernet cable to router, router, 3 pc (1 wireless, 2 wired with ethernet cables)
19) High ID or Low ID? (servers tab, my info on the right: ed2k network, under your numerical ID - kad network: status and udp status)
If you have low ID, and would try to solve it, answer to the following questions too.
20) (not really a question, say only if you know how to do it)
Make sure you know how to reset (to factory defaults) your device and note down the data for connecting to your ISP.
(in case of troubles, you can reset the router and you'll need those data - vpi - vci - username and password of your connection, and so forth...
those data are personal/private, you_SHOULD_NOT_post_them_here --- ONLY_you_should_know_them).
21) Manufacturer and model of your router
22) Screenshots of your router menus are welcome:
- UPNP settings
- DHCP settings
- lan ip clients settings (or: the place where you have reserved an ip address for your PCs, instead of using a static ip for each PC)
- virtual server/port forwarding or similar
- eventual firewall screen (of your router)
23) Have you put static ip to your pc (into tcp/ip properties of your connection properties)?
Here too, a screenshot would be welcome.
If you have reserved an IP address (from your router settings), it is not necessary to set a static IP to your PC.
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#3
Posted 22 October 2015 - 04:24 AM
ok let's go
.:Aqui Finda Sian Nissart:.
#4
Posted 22 October 2015 - 04:26 AM
This post has been edited by Matrik: 22 October 2015 - 04:30 AM
.:Aqui Finda Sian Nissart:.
#5
Posted 22 October 2015 - 04:29 AM
1) yes
2) w8.1 pro
3) no
4) no
5) True 13Mb/1Mb
6) 1
7) TCP 5110 | UDP 3110 UPnP enable
8) yes
9) 5 servers
10) download on peerate.net
11) 5-6 files
12) 60 files
13) Protocol Obfuscation enabled yes
14) Found sources (Statistics tab -> Transfer -> Downloads -> Session -> Found sources)?
15) On queue (Statistics tab -> Transfer -> Downloads -> Session -> Found sources -> On queue)?
16) Did you modify any values in Options -> Extended? And what?
17) What option is ticked in sharing emule with other computer users (Options -> Extended)?
18) Describe how your devices are arranged.
example:
- telephone jack, adsl filter, adsl cable to ethernet modem, ethernet modem, ethernet cable to router, router, 3 pc (1 wireless, 2 wired with ethernet cables)
19) High ID or Low ID? (servers tab, my info on the right: ed2k network, under your numerical ID - kad network: status and udp status)
If you have low ID, and would try to solve it, answer to the following questions too.
20) (not really a question, say only if you know how to do it)
Make sure you know how to reset (to factory defaults) your device and note down the data for connecting to your ISP.
(in case of troubles, you can reset the router and you'll need those data - vpi - vci - username and password of your connection, and so forth...
those data are personal/private, you_SHOULD_NOT_post_them_here --- ONLY_you_should_know_them).
23) no
This post has been edited by Matrik: 22 October 2015 - 09:21 AM
.:Aqui Finda Sian Nissart:.
#6
Posted 22 October 2015 - 08:43 AM
I do not see exactly your model, but others could be close enough. For example: http://portforward.c...2750B/eMule.htm
#7
Posted 22 October 2015 - 09:11 AM
Quote
I do not see exactly your model, but others could be close enough. For example: http://portforward.c...2750B/eMule.htm
I go see this before but not same
.:Aqui Finda Sian Nissart:.
#8
Posted 22 October 2015 - 10:36 AM
Matrik, on 22 October 2015 - 12:11 PM, said:
Close enough, and that should be sufficient.
Compare with this: http://pokde.net/tec...0e/#prettyPhoto
In your screenshots I see that PC's address is in DHCP range. In that case please add the PC's IP to DHCP reservations list.
This post has been edited by fox88: 22 October 2015 - 10:36 AM
#9
Posted 23 October 2015 - 08:17 AM
.:Aqui Finda Sian Nissart:.
#10
Posted 23 October 2015 - 03:26 PM
2) Go to your router settings, setup - local network - dhcp reservation lists (dhcp static ip configuration):
- Set ip address to 192.168.1.35
- Set mac address to your mac address with this format: AA:BB:CC:DD:EE:FF (i.e. without hyphens but using colons)
How to find it? Right click start, command prompt, (inside the command prompt) type getmac, press enter on your keyboard.
- click add
3) Log out from your router, close emule, restart your pc and router
4) Check if this worked
This post has been edited by xilolee: 23 October 2015 - 06:32 PM
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#11
Posted 23 October 2015 - 05:51 PM
I disable the UPNP
and I put the second adress mac
same this
I close eMule restart PC and router
and LowID
Thanks for more help
Best regards
.:Aqui Finda Sian Nissart:.
#12
Posted 23 October 2015 - 06:23 PM
Could you specify points 3, 5 and 18?
Quote
5) Name of your ISP, name of your connection and, possibly, their declared downstream and upstream bandwiths
18) Describe how your devices are arranged.
example:
- telephone jack, adsl filter, adsl cable to ethernet modem, ethernet modem, ethernet cable to router, router, 3 pc (1 wireless, 2 wired with ethernet cables)
This post has been edited by xilolee: 23 October 2015 - 06:33 PM
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#13
Posted 23 October 2015 - 06:39 PM
What is the model of modem you are using?
This post has been edited by fox88: 24 October 2015 - 09:44 AM
#14
Posted 24 October 2015 - 04:19 AM
Quote
yes
3) only avast , I have F-secure Freedom but not connected
5) My ISP is TRUEONLINE 13mb/1mb
18) if I understand this question My PC is only in wifi
.:Aqui Finda Sian Nissart:.
#15
Posted 24 October 2015 - 09:33 AM
What kind of connection is it?
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#16
Posted 24 October 2015 - 05:39 PM
.:Aqui Finda Sian Nissart:.
#17
Posted 24 October 2015 - 05:47 PM
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#18
Posted 25 October 2015 - 08:23 AM
the mac adress not same when I go CMD/getmac !?!
Quote
when I put 192.168.1.35 in my adress bar , I have nothing !
.:Aqui Finda Sian Nissart:.
#19
Posted 25 October 2015 - 08:54 AM
Matrik, on 25 October 2015 - 10:23 AM, said:
the mac adress not same when I go CMD/getmac !?!
I think that one is your router MAC address.
Matrik, on 25 October 2015 - 10:23 AM, said:
xilolee, on 24 October 2015 - 07:47 PM, said:
That isn't your public IP address.
Go to whatsmyip.org (or a similar website) to know your public ip.
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#20
Posted 25 October 2015 - 05:42 PM
Quote
Go to whatsmyip.org (or a similar website) to know your public ip.
ouppps !!! sometimes my english is wrong
When I put my public IP in my adress bar , My browser show me nothing
same last screenshot .
This post has been edited by Matrik: 25 October 2015 - 05:43 PM
.:Aqui Finda Sian Nissart:.