Emule 0.50A Zzul-Tra 2.6
#81
Posted 19 May 2012 - 02:40 PM
I have activated slotfocus, but when i untick the slotfocus option throught the contextual menù, nothing happens ... client doesn't lose full slot.
( Ehm, small feature req. Can you add the icon with skull for clients affected by the client analyzer ? )
10x
#82
Posted 20 May 2012 - 10:40 AM
Eulero, on 19 May 2012 - 03:40 PM, said:
I have activated slotfocus, but when i untick the slotfocus option throught the contextual menù, nothing happens ... client doesn't lose full slot.
ok, its a little bit tricky. you should set first in options-connection "upload speed per client". after this apply. now the slotfocus on/off should work with this settings. the problem is if you have slotfocus enabled in context menu and you open again options-connection window (maybe for other settings) and you apply, so it lost the "up speed per client" setting and the switch in context menu is not restore this. in short, set first a "upload speed per client" value and apply this. close options window and all should work now from context menu. my english is not very good but hope you understang what i mean.
.
Eulero, on 19 May 2012 - 03:40 PM, said:
thats no problem. i can replace this "white cross" icon with a "skull icon". (hope i remember next release)
#83
Posted 30 June 2013 - 03:12 PM
ZZUL-TRA is a great MOD, thanks for your hard work. Any info on future/new versions?
#84
Posted 30 June 2013 - 10:49 PM
TheSlayerofGod, on 30 June 2013 - 04:12 PM, said:
ZZUL-TRA is a great MOD, thanks for your hard work. Any info on future/new versions?
I'm alive, but busy in real live. First news on https://www.facebook.com/morph4u
#85
Posted 07 July 2013 - 09:55 PM
Quote
Morph4u, one question: ZZULtimativ-R V1.8 Hotfix is one of the best, probably the best MOD I have ever seen. It has a lot of features and it is very easy to use.
I have read somewhere that it has became ZZ-R, and, if that is true, I must say that ZZ-R is a little confuse to use, and has much less features than the ZZULtimativ
Do you have any plans for ZZULtimativ in the future?
This post has been edited by TheSlayerofGod: 07 July 2013 - 09:57 PM
#86
Posted 26 July 2013 - 07:52 PM
#87
Posted 26 July 2013 - 07:54 PM
#88
Posted 27 July 2013 - 06:49 AM
#89
Posted 27 July 2013 - 07:13 AM
Quote
Is not "netfinity's", it is already implemented in NeoMule.
#90
Posted 27 July 2013 - 07:24 AM
#91
Posted 27 July 2013 - 07:29 AM
#92
Posted 27 July 2013 - 07:41 AM
netfinity's Sub Chunk transfer, is reverse engineered form the eDonkey hybrid and leaks any verification before sharing as he did not added the protocol parts required for crumb hashing, although he stated that he is working on using AICH to verify the crumbs, but since they don't align wel with block boundrys this will not be a elegant solution.
it is the first client to be able to download form multiple networks the same file.
NL provides the first fully decentralized scalable torrent and DDL keyword search,
it implements an own novel anonymous file sharing network, providing anonymity and deniability to its users,
as well as many other new features.
It is written in C++ with Qt and is available for Windows, Linux and MacOS.
#93
Posted 27 July 2013 - 09:15 AM
#94
Posted 27 July 2013 - 01:12 PM
This post has been edited by Eulero: 27 July 2013 - 01:12 PM
#95
Posted 27 July 2013 - 08:21 PM
Eulero, on 27 July 2013 - 10:12 AM, said:
Eulero, in you have limited your ZZUL-TRA to 4 slots, but, each slot will reach 23.5 KB/s at max.
What I mean is to be able to limit the slots to 4, but, without the 23.5 KB/s limitation. No matter what, ZZUL-TRA will open only four slots, but, with slotfocus. So, we would have all the 94 KB/s available to one slot, and the other three would be standby.
Sadly, this is not happening, and, with my 40 KB/s upload speed, I have almost 20 upload slots open and running...
#96
Posted 27 July 2013 - 10:36 PM
If you want slotfocus, use ONE slot.
If you want 4 slots, you don't need slotfocus. Simple. N slots in standby is not very smart.
#97
Posted 27 July 2013 - 10:42 PM
#98
Posted 29 April 2014 - 10:15 PM
It's good, but sometimes I have some problems when I want to set y slots:
I put a capacity upload of 288.
If I set my upload limit to 250, if I set 2 slots it jumps to 4, if I set 3 it jumps to 12, if I set 4 it's ok.
But if I set upload limit to 260 or 288 whenever I set some 2,3,4 slots I get always weird jumps to very high values...
So, at the moment I can use it only at 250/4 slots.
I don't think this is normal, is it?
This post has been edited by franketto: 30 April 2014 - 12:05 PM
#99
Posted 03 August 2020 - 06:01 PM
tanke, on 03 August 2020 - 08:51 PM, said:
Looks like your upload limit is set to a higher value. Because slotfocus will open more and more slots to reach that limit. Try lowering upload speed.
This post has been edited by omeringen: 03 August 2020 - 06:03 PM