Official eMule-Board: How To Get A Reliable Server List & A Good Ipfilter - Official eMule-Board

Jump to content


  • (7 Pages)
  • +
  • « First
  • 4
  • 5
  • 6
  • 7

How To Get A Reliable Server List & A Good Ipfilter A visual tuto

#101 User is offline   xilolee 

  • eMule 0.50b BETA1 user
  • PipPipPipPipPipPipPip
  • Group: Italian Moderators
  • Posts: 7983
  • Joined: 20-August 08

Posted 04 October 2008 - 08:16 PM

http://forum.emule-p...s...st&p=894813

message #7 of this guide

View PostTrebla, on Jun 21 2007, 12:53 AM, said:

5) In the box bellow the title: " Update from URL:(filter.dat-or PeerGuardian-format)" paste this link: http://emulepawcio.s...et/ipfilter.zip and after push the close button "Load"


this doesn't work ... i suggest to change it with:

http://emulepawcio.s...et/ipfilter.DAT

cheers :flowers:

This post has been edited by xilolee: 04 October 2008 - 08:17 PM

INCONCEIVABLE! - You keep using that word. I do not think it means what you think it means.
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non è serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dà subito l'allegrIa! Immagine Postata
0

#102 User is offline   fox88 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 4974
  • Joined: 13-May 07

Posted 05 October 2008 - 03:08 PM

View Postxilolee, on Oct 5 2008, 12:16 AM, said:


Error 404
0

#103 User is offline   torpon 

  • I'm so tired
  • PipPipPipPipPipPipPip
  • Group: Moderator
  • Posts: 21272
  • Joined: 20-January 05

Posted 05 October 2008 - 04:08 PM

This one works
http://surfnet.dl.sourceforge.net/sourceforge/emulepawcio/ipfilter.dat
It isn´t the only one.

Cheers :D

#104 User is offline   xilolee 

  • eMule 0.50b BETA1 user
  • PipPipPipPipPipPipPip
  • Group: Italian Moderators
  • Posts: 7983
  • Joined: 20-August 08

Posted 05 October 2008 - 04:52 PM

View Postfox88, on Oct 5 2008, 03:08 PM, said:

View Postxilolee, on Oct 5 2008, 12:16 AM, said:


Error 404


i think the error was caused by the DAT in capital letters ... try with dat in small letters :bounce:

http://emulepawcio.s...et/ipfilter.dat

cheers :flowers:

i have also noted that this link sometimes gives an incorrect ipfilter.dat ... maybe for an incorrect mirror ?

:confused:

This post has been edited by xilolee: 05 October 2008 - 04:55 PM

INCONCEIVABLE! - You keep using that word. I do not think it means what you think it means.
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non è serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dà subito l'allegrIa! Immagine Postata
0

#105 User is offline   xilolee 

  • eMule 0.50b BETA1 user
  • PipPipPipPipPipPipPip
  • Group: Italian Moderators
  • Posts: 7983
  • Joined: 20-August 08

Posted 14 October 2008 - 11:47 PM

now this link works (in options - security - LOAD): http://emulepawcio.s...et/ipfilter.zip

but the size of the ipfilter.dat in it is 14,1 MB, and the emule message is:

15/10/2008 1:19:58: 225627 IP filters loaded

the file in ipfilter.zip now is: "ipfilter.dat" whereas before, in past days, it was: "p2pguardian.dat"

so this explain why that didn't work.

instead if you use: http://emulepawcio.s...et/ipfilter.dat

you have this message: 15/10/2008 1:14:38: 251759 IP filters loaded

(this drove me crazy :frust: )

cheers :D

This post has been edited by xilolee: 18 October 2008 - 03:43 AM

INCONCEIVABLE! - You keep using that word. I do not think it means what you think it means.
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non è serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dà subito l'allegrIa! Immagine Postata
0

#106 User is offline   dexbower 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 3
  • Joined: 17-October 08

Posted 17 October 2008 - 10:32 PM

i read it all
thank you so much 100/100 totally helpful! :thumbup: :thumbup: :thumbup:
0

#107 User is offline   Cobra SA 

  • Splendid Member
  • PipPipPipPip
  • Group: Members
  • Posts: 113
  • Joined: 15-May 06

Posted 18 October 2008 - 02:40 AM

http://www.gruk.org/server.met.gz
http://www.peerates.net/servers.php

<--- both are dead, is there a new server list?

Is emule dead? :unsure:

This post has been edited by Cobra SA: 18 October 2008 - 02:46 AM

0

#108 User is offline   shortypower 

  • ed2k-stats manager
  • PipPipPipPip
  • Group: Members
  • Posts: 113
  • Joined: 11-September 04

Posted 18 October 2008 - 02:52 AM

View PostCobra SA, on Oct 18 2008, 04:40 AM, said:

http://www.gruk.org/server.met.gz
http://www.peerates.net/servers.php

<--- both are dead, is there a new server list?

is not dead

View PostCobra SA, on Oct 18 2008, 04:40 AM, said:

Is emule dead? :unsure:

something with your configuration is not ok eMule is not dead ;)

http://forum.emule-p...showtopic=48111
..:: You don't haffi dread to be Rasta ::..

0

#109 User is offline   Bethy 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 6
  • Joined: 28-October 08

Post icon  Posted 31 October 2008 - 12:15 PM

View PostTrebla, on Jun 21 2007, 01:56 AM, said:

6) Inmediatelly the download wil be start

Posted Image

7) When the download has finished, push the "OK" button to save the settings and leave the Options settings.

Posted Image

You should to push the "Load" button every time you want to update the filter.

I hope this tuto be helpful for the eMule users. I apollogise also for my low english level. Please, excuse me if aome word it is not the correct.

See You!!!

Thanks alot Trebla you saved my life I'm new to emule and green into the bargain, I followed your intructions which are very clear and your English is just fine, thanks a lot Bethy.
0

#110 User is offline   Bethy 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 6
  • Joined: 28-October 08

Posted 31 October 2008 - 05:33 PM

View PostTrebla, on Jun 21 2007, 01:56 AM, said:

6) Inmediatelly the download wil be start

Posted Image

7) When the download has finished, push the "OK" button to save the settings and leave the Options settings.

Posted Image

You should to push the "Load" button every time you want to update the filter.

I hope this tuto be helpful for the eMule users. I apollogise also for my low english level. Please, excuse me if aome word it is not the correct.

See You!!!


Hello Trebla it's me again! Could you help me with the low Id problem? I had no problems following your Reliable Sever list instructions although it took me a while to do it!!. It's all so new to me and I would be grateful for your help! Thanks a lot, Bethy
0

#111 User is offline   xilolee 

  • eMule 0.50b BETA1 user
  • PipPipPipPipPipPipPip
  • Group: Italian Moderators
  • Posts: 7983
  • Joined: 20-August 08

Posted 01 November 2008 - 02:02 AM

for help with ID, go here: http://forum.emule-p...hp?showforum=96

and open a new topic !

:flowers:

This post has been edited by xilolee: 01 November 2008 - 02:03 AM

INCONCEIVABLE! - You keep using that word. I do not think it means what you think it means.
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non è serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dà subito l'allegrIa! Immagine Postata
0

#112 User is offline   Galileu 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 1
  • Joined: 02-January 09

Posted 02 January 2009 - 04:04 PM

View PostTrebla, on Jan 2 2008, 07:25 PM, said:

View Postsariimi, on Jan 2 2008, 09:47 PM, said:

I alsóo thank you VERY MUCH for this tutorial! My only question is is it ok to have only 20 servers remaining?

No it is not normal, actually only 13 servers remain ok. Review and apply the Ip Filter also.

Good Luck!


And what about remaining just 3 servers after following all the steps?

I stayed just with:
eDonkeyServer No1,
eDonkeyServer No2, and
VTU DonkeyServer No1 -Now On New Hardware

My eMule seems to be working fine, but I wonder if I stayed with so few servers because I did something wrong while following up the tutorial.

By the way, Trebla, thank you very much for the very complete and easy-to-use tutorial.
0

#113 User is offline   R3Qu13M 

  • IÐiTwøKei TraÐe
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 2019
  • Joined: 06-October 07

Posted 02 January 2009 - 04:59 PM

~ Galileu
Just 3 servers = the tutorial you have realized it perfectly.
Lamentably there´re no any more genuine active servers.

Posted Image
0

#114 User is offline   xscarab 

  • Mrs Chief Mumpopo 'Monkeyballs' Umboga III
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 4334
  • Joined: 22-February 04

Posted 21 January 2009 - 10:57 PM

Sounds like you're using a rogue version of emule (one not downloaded from here) and/or you've acquired something nasty via a file you've downloaded using emule, and should check your computer for malware etc.

You could also try the following. close emule. open emule's config folder and delete AC_ServerMetURLs.dat and server.met (and server.met.old if you have it, just for good measure) I know you said you've already tried this .. but...... You might want to search (include hidden and system files) your computer to see if you have any other copies of those files - it's not so uncommon that users don't realise they've installed more than one copy of emule and config files can get "muddled"

Also, why are you using such an old version of emule? (actually that answer doesn't belong here - it looks like you need to open a topic in support really, or maybe a kind mod would move your posts and the replies from this guide.)

I will pm you something else to try too - not posting it here, as it's too offtopic for this guide ;)

edit: it should be pointed out that this is not the most up-to-date guide - torpons guide is the most recent. Some of the information in this guide is out of date now, and certainly you won't and shouldn't have the same servers that appear in the screenshots here. Also, it's probably not a great idea to use gruk now as it's not kept updated, just use peerates list.

This post has been edited by xscarab: 21 January 2009 - 11:15 PM

Are we nearly there yet?
0

#115 User is offline   nimue 

  • Member
  • PipPip
  • Group: Members
  • Posts: 20
  • Joined: 13-September 04

Post icon  Posted 17 April 2009 - 07:41 PM

View PostElChele, on Jul 30 2007, 12:14 PM, said:

Ho everyone
Server List for eDonkey2000, is filled of FKS, certainly I dunno why it's remain as suggested in the page help. :confused:
bye

Thank you for your clear instructions, it has worked perfectly. Great work!
0

#116 User is offline   espresso 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 1
  • Joined: 04-June 09

Posted 30 July 2009 - 09:13 PM

I've had eMule for over a year and have never had a problem with the servers up until now. I've followed the whole thread and made all the changes but I now have a dodgy looking server list...to which I can't connect.

Any ideas?
0

#117 User is offline   SS1900 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 3737
  • Joined: 15-November 08

Posted 31 July 2009 - 05:40 AM

this guide is a bit old try here Getting And Keeping Reliable Server List And Ipfilter

:flowers: :flowers:

This post has been edited by SS1900: 31 July 2009 - 06:59 AM

0

#118 User is offline   dalila1 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 7
  • Joined: 21-September 09

Posted 21 September 2009 - 11:25 AM

million of tnx.... :love:
0

#119 User is offline   babali 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 2
  • Joined: 14-February 09

Posted 31 March 2010 - 11:44 PM

Terrific. Thanks!
0

#120 User is offline   siany1970 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 1
  • Joined: 23-August 10

Posted 23 August 2010 - 10:48 AM

Hi Trebla,

I followed all your instructions correctly but still when I try to do a search I get told that I'm not connected to a server or the kad network. What can I do? Any advice would be very welcome. Thanks.
0

  • Member Options

  • (7 Pages)
  • +
  • « First
  • 4
  • 5
  • 6
  • 7

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users