Official eMule-Board: Netf Warp Svn-121 (2013-08-23) - Official eMule-Board

Jump to content


  • (22 Pages)
  • +
  • « First
  • 20
  • 21
  • 22

Netf Warp Svn-121 (2013-08-23) Better handling of for rare files through Sub-Chunk Transfers

#421 User is offline   Sir_Boagalott 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 470
  • Joined: 23-September 02

Posted 25 November 2013 - 03:39 PM

View PosttHeWiZaRdOfDoS, on 11 November 2013 - 01:27 AM, said:

I don't know if Sir Boagalott already told you but I receive illegal AICH requests from WARP clients (i.e. while I don't have a valid AICH hash, yet).
Also, WARP often directly puts my clients into upload but let's them starve there until disconnected with 3 req blocks not yet completed.


I can personally confirm that - even with warp to warp I have seen that happen.

I also saw this:

Quote

11/25/2013 10:29:24 AM: AICH Packet Request: Failed to create recoverydata - Hashset not ready or requested Hash differs from Masterhash for SCT - .. all x2.rar to 192.168.1.1 '(cTBDOqP) nick [jeaEuB]' (eMule v0.50a [kMule Build20131124],NoNeededParts/Uploading/None)

1

#422 User is offline   Enig123 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 553
  • Joined: 22-November 04

Posted 08 December 2013 - 09:11 PM

Cannot access the latest source for quite a long time, can someone in charge fix this?
0

#423 User is offline   xilolee 

  • eMule 0.50b BETA1 user
  • PipPipPipPipPipPipPip
  • Group: Italian Moderators
  • Posts: 7983
  • Joined: 20-August 08

Posted 08 December 2013 - 09:38 PM

Doesn't this work?
ed2k://|file|WARP_Svn121_source.zip|7986189|D54AD5800123DAE8076E7DFC5D5F6CBC|/

The http link works (too)...

This post has been edited by xilolee: 08 December 2013 - 09:39 PM

INCONCEIVABLE! - You keep using that word. I do not think it means what you think it means.
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa! Immagine Postata
0

#424 User is offline   Enig123 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 553
  • Joined: 22-November 04

Posted 08 December 2013 - 10:58 PM

The svn is down though, which is also what I was talking about.
0

#425 User is offline   xilolee 

  • eMule 0.50b BETA1 user
  • PipPipPipPipPipPipPip
  • Group: Italian Moderators
  • Posts: 7983
  • Joined: 20-August 08

Posted 08 December 2013 - 11:52 PM

Sorry, you meant the online sources...!!!
INCONCEIVABLE! - You keep using that word. I do not think it means what you think it means.
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa! Immagine Postata
0

#426 User is offline   Sir_Boagalott 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 470
  • Joined: 23-September 02

Posted 09 December 2013 - 09:22 AM

View PostEnig123, on 08 December 2013 - 04:11 PM, said:

Cannot access the latest source for quite a long time, can someone in charge fix this?


I'm not in charge, and I dont speak for netfinity, but I have been in touch with him recently.

netfinity has been fairly busy lately so I'm not sure how much updating he has done recently. I know he had a hdd crash so that might explain why his server is down. Luckily he didnt loose any code.

Whats the last Svn src you have? I think its up to v130, so it is possible the last time you DL it, thats its still the same.
0

#427 User is offline   netfinity 

  • Master of WARP
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 1658
  • Joined: 23-April 04

Posted 13 December 2013 - 10:08 PM

SVN server has been restarted. Don't know why it went down. My Jenkins server went corrupt as well, and I have to rebuild it from scratch. Yes, it is still at 130.
eMule v0.50a [NetF WARP v0.3a]
- Compiled for 32 and 64 bit Windows versions
- Optimized for fast (100Mbit/s) Internet connections
- Faster file completion via Dynamic Block Requests and dropping of stalling sources
- Faster searching via KAD with equal or reduced overhead
- Less GUI lockups through multi-threaded disk IO operations
- VIP "Payback" queue
- Fakealyzer (helps you chosing the right files)
- Quality Of Service to keep eMule from disturbing VoIP and other important applications (Vista/7/8 only!)
0

#428 User is offline   Enig123 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 553
  • Joined: 22-November 04

Posted 08 February 2014 - 09:54 PM

NetFinity,

When downloading 4G and up files using your new chunk selection algorithm, I noticed a pattern that it tend not to select chunks in the rear part of the file.

Note: I have commented out the Incremental download part, so the behavior of selections should be random weighted toward rarest part.

Would you please take a look at the algorithm implementation and if I am right offer a fix for that?

This post has been edited by Enig123: 08 February 2014 - 10:21 PM

0

#429 User is offline   Sir_Boagalott 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 470
  • Joined: 23-September 02

Posted 09 February 2014 - 11:28 AM

That behavior is intended. After DL 1st & last chunks, when the chunk avail is equal it will select chunks in order. i.e. linear, sequential.
0

#430 User is offline   netfinity 

  • Master of WARP
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 1658
  • Joined: 23-April 04

Posted 11 February 2014 - 08:13 PM

@Enig123The rarest part should always take precedence, but if two parts are of same weight it would chose in a linear order. Reason behind it was to improve previewing of files. I hoped to find a way to test which part of the file was being previewed and only chose the next few chunks in sequence and do the rest at random. I might change this, but didn't find it an big issue to change it right away.
eMule v0.50a [NetF WARP v0.3a]
- Compiled for 32 and 64 bit Windows versions
- Optimized for fast (100Mbit/s) Internet connections
- Faster file completion via Dynamic Block Requests and dropping of stalling sources
- Faster searching via KAD with equal or reduced overhead
- Less GUI lockups through multi-threaded disk IO operations
- VIP "Payback" queue
- Fakealyzer (helps you chosing the right files)
- Quality Of Service to keep eMule from disturbing VoIP and other important applications (Vista/7/8 only!)
0

#431 User is offline   Tuxman 

  • lizzie and prog-rock fanatic
  • PipPipPipPipPipPipPip
  • Group: Validating
  • Posts: 2707
  • Joined: 26-July 04

Posted 12 August 2015 - 01:44 PM

Any new plans for NetF? Windows 10 is not listed as compatible yet. :flowers:
[ eMule beba ] :: v2.72 released, v3.00 in the works ...
- feel the lightweight! - featuring Snarl support, the Client Analyzer and tits!
Coded by a Golden eMule Award winner and most people's favorite modder!
..........................................
Music, not muzak:
Progressive Rock :: my last.fm profile
..........................................
eMule user since 0.28 ...
-[ ... and thanks for all the fish! ]-
1

#432 User is offline   dietor 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 8
  • Joined: 16-January 16

Posted 23 January 2016 - 03:41 PM

View PostTuxman, on 12 August 2015 - 01:44 PM, said:

Any new plans for NetF? Windows 10 is not listed as compatible yet. :flowers:

Tuxman yuo are the only one, maybe you can work on mephisto?
Don't know.
Maybe an integrated torrent-Kad emule? I am a noob! sorry.
the mod I prefer is yours "BEBA" and "eMule Mephisto Mod"
0

#433 User is offline   pier4r 

  • Ex falso quodlibet ; Kad is the major concept behind emule.
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 588
  • Joined: 31-March 09

Posted 30 January 2016 - 03:44 PM

View Postdietor, on 23 January 2016 - 04:41 PM, said:

View PostTuxman, on 12 August 2015 - 01:44 PM, said:

Any new plans for NetF? Windows 10 is not listed as compatible yet. :flowers:

Tuxman yuo are the only one, maybe you can work on mephisto?
Don't know.
Maybe an integrated torrent-Kad emule? I am a noob! sorry.
the mod I prefer is yours "BEBA" and "eMule Mephisto Mod"


If you search for hybrid clients, check out mldonkey / shaerazaa (the open dource ones, do not fall in traps!)

Plus be patient and search what every configuration option means, slowly you will find what is good for you.
>>>Feature Request (ICS) or SOTN, EmuleCollectionV2 >>> Emule on old hardware (intel pentium 2 or 3 - via c3 - and so on) with good OS settings and enough ram (256+ mb): great >>>user of: eMule - Xtreme - ZZUL bastard - SharX - SharkX 1.8b5 pierQR - ZZUL-Tra - ZZUL-Tra-TL - kMule - Beba

Extended signature: click.
0

#434 User is offline   SS1900 

  • Golden eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 3737
  • Joined: 15-November 08

Posted 14 April 2017 - 07:19 AM

View PostTuxman, on 12 August 2015 - 02:44 PM, said:

Any new plans for NetF? Windows 10 is not listed as compatible yet. :flowers:


the Netf Warp Svn-121 x64 works well with win 10 x64 ( CU updated ).

:flowers:
0

  • Member Options

  • (22 Pages)
  • +
  • « First
  • 20
  • 21
  • 22

2 User(s) are reading this topic
0 members, 2 guests, 0 anonymous users