Emule V0.50A Mephisto V3.0 Xtreme's evil heir | Upload improvements and installer
#441
Posted 16 April 2011 - 02:46 PM
other than that, what are your specs? what OS, what hardware, how do you connect to the internet? i have trouble believing any ISP would have problems handling the load of KAD in a reasonably used eMule client on any connection that is better than 56k dial-up.
[Imagine there was a sarcasm meter right here!]
No, there will not be a new version of my mods. No, I do not want your PM. No, I am certain, use the board and quit sending PMs. No, I am not kidding, there will not be a new version of my mods just because of YOU asking for it!
#442
Posted 18 April 2011 - 09:31 PM
if emule start
the first time connect server is no problem
but if double Click the same server
the server will be block with ip filter
need restart emule OR reload ip filter to be fix this
my setting use on ScarAngel 4.0 is no problem
but change mod to Mephisto 3.0 will be error
is same ipfilter file and setting
PS.this is new install
this is LOG
19/4/2011 4:53:58: Connecting to eDonkeyServer No2 (212.63.206.35:4242)...
19/4/2011 4:53:59: Connected to eDonkeyServer No2 (212.63.206.35:4242), sending login request
19/4/2011 4:54:00: Connection established on: eDonkeyServer No2 (212.63.206.35:4242)
19/4/2011 4:54:00: received an IP: -----, NAFC-Adapter will be checked
19/4/2011 4:54:00: New client ID is -----
//-----------------double Click the same server-------------------//
19/4/2011 4:54:01: you can't connect to filtered server: 212.63.206.35, www.eDonkey.to
//-----------------RELOAD IP filter-------------------//
19/4/2011 4:54:04: 121222 IP filters loaded
//-----------------will be FIX------------------//
19/4/2011 4:54:05: Connecting to eDonkeyServer No2 (212.63.206.35:4242)...
19/4/2011 4:54:06: Connected to eDonkeyServer No2 (212.63.206.35:4242), sending login request
19/4/2011 4:54:07: Connection established on: eDonkeyServer No2 (212.63.206.35:4242)
19/4/2011 4:54:07: received an IP: -----, NAFC-Adapter will be checked
19/4/2011 4:54:07: New client ID is -----
my english too bad sorry
This post has been edited by 920357689: 18 April 2011 - 09:34 PM
#443
Posted 19 April 2011 - 02:28 AM
Stulle, on 16 April 2011 - 11:46 PM, said:
but sharing 600 files through kad makes more connections than 600 downloads!
(share words + share hash)
everyone shouldn't share much files???
Tore his pads, no hope to mend.
But I'll never leave him, sure,
Cause I love my fluffy friend!
(Rus: Уронили Мула на пол, оторвали Мулу лапу. Все равно его не брошу - потому что он хороший!)
#444
Posted 19 April 2011 - 01:50 PM
0920357689, on 18 April 2011 - 10:31 PM, said:
if emule start
the first time connect server is no problem
but if double Click the same server
the server will be block with ip filter
need restart emule OR reload ip filter to be fix this
my setting use on ScarAngel 4.0 is no problem
but change mod to Mephisto 3.0 will be error
is same ipfilter file and setting
PS.this is new install
this is LOG
19/4/2011 4:53:58: Connecting to eDonkeyServer No2 (212.63.206.35:4242)...
19/4/2011 4:53:59: Connected to eDonkeyServer No2 (212.63.206.35:4242), sending login request
19/4/2011 4:54:00: Connection established on: eDonkeyServer No2 (212.63.206.35:4242)
19/4/2011 4:54:00: received an IP: -----, NAFC-Adapter will be checked
19/4/2011 4:54:00: New client ID is -----
//-----------------double Click the same server-------------------//
19/4/2011 4:54:01: you can't connect to filtered server: 212.63.206.35, www.eDonkey.to
//-----------------RELOAD IP filter-------------------//
19/4/2011 4:54:04: 121222 IP filters loaded
//-----------------will be FIX------------------//
19/4/2011 4:54:05: Connecting to eDonkeyServer No2 (212.63.206.35:4242)...
19/4/2011 4:54:06: Connected to eDonkeyServer No2 (212.63.206.35:4242), sending login request
19/4/2011 4:54:07: Connection established on: eDonkeyServer No2 (212.63.206.35:4242)
19/4/2011 4:54:07: received an IP: -----, NAFC-Adapter will be checked
19/4/2011 4:54:07: New client ID is -----
my english too bad sorry
thank you for not reading anything that has been said before.
mss73, on 19 April 2011 - 03:28 AM, said:
(share words + share hash)
everyone shouldn't share much files???
sharing 600 files is already a lot but it's still reasonable if the amount is not too much. it comes down to the size of your overall share and your upload bandwidth. anyway, the load KAD produces for sharing files should be rather limited as we only have a certain number of store actions at any given time. on the other hand, making a lot of searches and downloading a huge number of files might increase the number of KAD actions significantly. besides, i found that i got better results downloading with a total of < 1000 sources on < 20 files.
[Imagine there was a sarcasm meter right here!]
No, there will not be a new version of my mods. No, I do not want your PM. No, I am certain, use the board and quit sending PMs. No, I am not kidding, there will not be a new version of my mods just because of YOU asking for it!
#445
Posted 22 April 2011 - 01:45 AM
mss73, on 16 April 2011 - 05:35 PM, said:
Stulle, on 16 April 2011 - 11:46 PM, said:
100 sources means 0.1666666 per 1 file
Problem is sources, not connections
Tore his pads, no hope to mend.
But I'll never leave him, sure,
Cause I love my fluffy friend!
(Rus: Уронили Мула на пол, оторвали Мулу лапу. Все равно его не брошу - потому что он хороший!)
#446
Posted 26 April 2011 - 02:34 AM
Thanks for the new version,but I have some problem .
In LowID everything is ok,program run very well,but in HighID when I connect to the servers program freezes.
I found some interesting things.
1、highid + “enable protocol obfuscation” = freeze
2、highid + disable protocol obfuscation = fine
I hope this information will help you.
P.S. sorry for my poor English
This post has been edited by shift21: 26 April 2011 - 05:00 AM
#447
Posted 26 April 2011 - 10:32 AM
I don't use ed2k-server and use "only" obfuscated connection (refuse non-obfuscated).
after 3-5 mins during the re-hash process, the Mephisto crash (with the "dump" created box).
I have tried :
- delete config.ini
- delete known.met (and 64)
- delete client.met
but always crash...in setting, i have change the refresh shared files from 240 to 60.
#448
Posted 26 April 2011 - 02:51 PM
shift21, on 26 April 2011 - 03:34 AM, said:
Thanks for the new version,but I have some problem .
In LowID everything is ok,program run very well,but in HighID when I connect to the servers program freezes.
I found some interesting things.
1、highid + “enable protocol obfuscation” = freeze
2、highid + disable protocol obfuscation = fine
I hope this information will help you.
P.S. sorry for my poor English
Thank you so much for discarding anything that has been said up until this point. I really do hate not having to repeat myself over and over!
Meuh6879, on 26 April 2011 - 11:32 AM, said:
I don't use ed2k-server and use "only" obfuscated connection (refuse non-obfuscated).
after 3-5 mins during the re-hash process, the Mephisto crash (with the "dump" created box).
I have tried :
- delete config.ini
- delete known.met (and 64)
- delete client.met
but always crash...in setting, i have change the refresh shared files from 240 to 60.
Like always I do suggest a clean install. If there is a problem when using the files written with another eMule mod, chances are the other mod has ruined something since the changes done in Mephisto have thoroughly been tested for some years now in various mods. You can check if everything is fine by creating a new installation with official eMule. All files should work in Mephisto without any problem. Same should apply for MorphXT, ScarAngel, Xtreme and StulleMule. I can not vouch for any other mod, though.
As for the dump, please provide me with the dumps you created and make sure to send me as much information as possible. Such as logs, verbose logs, settings, system and so forth. Anyway, I am using the mod and I am pretty certain nothing is wrong with the hashing because it works flawlessly here. You will have to try a clean install (delete all files!) to verify this is actually a problem of Mephisto.
[Imagine there was a sarcasm meter right here!]
No, there will not be a new version of my mods. No, I do not want your PM. No, I am certain, use the board and quit sending PMs. No, I am not kidding, there will not be a new version of my mods just because of YOU asking for it!
#449
Posted 13 June 2011 - 11:10 AM
Today Mephisto hangs (not responding in the Windows Task Manager) every time I try to connect to eD2K Network - changed nothing since I quitted the program yesterday. The last line in the log says:
Connected to Master Server 1 (IP-address), sending login request.
"My info"-window shows:
eD2K Network
Status: Connecting
I have tested my ports, and the resulting web page said they were fine.
I used tracert-command to check if I can reach the login server, and it traced all the way to it just fine.
Kad Network connects fine (although the nodes did disappear yesterday after some time, and I had to reconnect a few times).
Fetched new the server list, and tried connecting after that. Selected another server from the server list, right-clicked and tried to connect that server. Removed all other servers, except one. None of these helped.
The client hangs every time, tried about two dozen times already, rebooted computer twice: no help. I have no other applications running while trying to resolve this. Luckily I don't have the client autoconnecting from the start, otherwise I fear I couldn't change any settings (as it hangs).
I'm running WIndowsXP SP3, ZoneAlarm firewall (eMule access allowed in (server) and out, trusted and internet zones).
P.S. (I was adviced to post here... first posted under Support - Do You Need Help? > Network & ID related). Is this the thread we should post all Mephisto related problems? Sorry, but I've read a bunch of stickys before posting, including this threads' and couldn't find it said anywhere! Nor did I know Morpheus is an Xtreme MOD.
#450
Posted 13 June 2011 - 01:14 PM
[Imagine there was a sarcasm meter right here!]
No, there will not be a new version of my mods. No, I do not want your PM. No, I am certain, use the board and quit sending PMs. No, I am not kidding, there will not be a new version of my mods just because of YOU asking for it!
#451
Posted 24 January 2012 - 09:02 PM
I would like to update to version 3.0, but this problem with servers made me think twice. Is there any idea about when and if this will be solved?
Thanks.
#452
Posted 24 January 2012 - 09:31 PM
[Imagine there was a sarcasm meter right here!]
No, there will not be a new version of my mods. No, I do not want your PM. No, I am certain, use the board and quit sending PMs. No, I am not kidding, there will not be a new version of my mods just because of YOU asking for it!
#453
Posted 25 January 2012 - 05:32 PM
About the nodes from kad network. How regularly do you advise me to update them? Or does Mephisto update them automatically at startup?
One little nagging question...
The "known clients" window disappeared from my Transfers window. Any reason for that?
#454
Posted 25 January 2012 - 06:27 PM
Nobody needs updating nodes file except some rare situations. eMule already saves nodes which is uniquely best for you, on close action. About "known clients", see options -> display --> Save CPU & Ram settings.
This post has been edited by omeringen: 25 January 2012 - 06:33 PM
#455
Posted 25 January 2012 - 07:24 PM
[Imagine there was a sarcasm meter right here!]
No, there will not be a new version of my mods. No, I do not want your PM. No, I am certain, use the board and quit sending PMs. No, I am not kidding, there will not be a new version of my mods just because of YOU asking for it!
#456
Posted 26 January 2012 - 08:35 PM
Anyway, i'm pretty well accustomed to emule, it's just sometimes we loose ourselves amidst so many options.
#457
Posted 26 January 2012 - 08:58 PM
[Imagine there was a sarcasm meter right here!]
No, there will not be a new version of my mods. No, I do not want your PM. No, I am certain, use the board and quit sending PMs. No, I am not kidding, there will not be a new version of my mods just because of YOU asking for it!
#458
Posted 23 March 2012 - 09:02 AM
LifeSuks, on 13 June 2011 - 11:10 AM, said:
Today Mephisto hangs (not responding in the Windows Task Manager) every time I try to connect to eD2K Network - changed nothing since I quitted the program yesterday. The last line in the log says:
Connected to Master Server 1 (IP-address), sending login request.
"My info"-window shows:
eD2K Network
Status: Connecting
I have tested my ports, and the resulting web page said they were fine.
I used tracert-command to check if I can reach the login server, and it traced all the way to it just fine.
Kad Network connects fine (although the nodes did disappear yesterday after some time, and I had to reconnect a few times).
Fetched new the server list, and tried connecting after that. Selected another server from the server list, right-clicked and tried to connect that server. Removed all other servers, except one. None of these helped.
The client hangs every time, tried about two dozen times already, rebooted computer twice: no help. I have no other applications running while trying to resolve this. Luckily I don't have the client autoconnecting from the start, otherwise I fear I couldn't change any settings (as it hangs).
I'm running WIndowsXP SP3, ZoneAlarm firewall (eMule access allowed in (server) and out, trusted and internet zones).
P.S. (I was adviced to post here... first posted under Support - Do You Need Help? > Network & ID related). Is this the thread we should post all Mephisto related problems? Sorry, but I've read a bunch of stickys before posting, including this threads' and couldn't find it said anywhere! Nor did I know Morpheus is an Xtreme MOD.
I have the same problem as yours with Mephisto 3.0 on Vista x64. Establishing a ED2K connecting would bring the program unresponsive!
#459
Posted 23 March 2012 - 02:46 PM
#460
Posted 05 May 2012 - 08:20 AM
how I can remove that bar on the right Cola Customers
Thanks in advance and sorry for my bad English
This post has been edited by Mato1: 05 May 2012 - 08:20 AM