Testing Version 0.70 (completed) Community version
#141
Posted 17 December 2023 - 03:59 PM
My Best Regards
#142
Posted 19 December 2023 - 10:58 PM
bluesnow, on 27 September 2023 - 06:46 PM, said:
Not file dump is created after hangs
With the latest version, it seems to fix this problem, and even with some slow GUI responses, the new version loads files larger than 34K very fast and even the hash speed has increased a lot. Very stable version for me. Categories, schedules and more continue to work well.
Thank you @fox88 for your invaluable work.
#143
Posted 20 December 2023 - 05:15 AM
i have my upload set to 50% of max upload speed,
max sources / file to 2000,
max connections to 900,
max new connections / 5 secs to 20,
max half-open connections to 9,
around 400 shared files,
i am using the second version of emule 0.70a, i don't remember to see this issue on emule 0.60d.
i.imgur.com/XSI7LWN.png
This post has been edited by Aokromes: 20 December 2023 - 05:16 AM
#144
Posted 20 December 2023 - 07:45 AM
Such behaviour of peers was seen and reported long ago. Maybe in 0.50b beta/code discussions if not earlier.
#145
Posted 20 December 2023 - 09:18 AM
sometimes i see:
i.imgur.com/NSZ6p4w.png
this time it reached after 10 minutes, i go to close and reopen client to see if there is a way to reproduce.
This post has been edited by Aokromes: 20 December 2023 - 09:31 AM
#146
Posted 21 December 2023 - 06:07 AM
21/12/2023 6:52:44: Removing client from upload list: Remote client cancelled transfer. Client: xxxx@xxxxxx (xxxxx) 'xxx' (eMule v0.50a,NoNeededParts/Uploading/None) Transferred: 1:40 mins SessionUp: 3.66 KB QueueSessionPayload: 10.01 KB In buffer: 330.00 KB Req blocks: 1 File: xxxxxxxxxxxxxxxxxxxxxxxxx
21/12/2023 6:53:04: Adding client to upload list: Not enough open upload slots for the current speed Client: xxxxxxxxxxxxxx 'xxxxx' (aMule v2.3.3,NoNeededParts/None/None)
21/12/2023 6:53:53: Obfuscated packet expected but magicvalue mismatch on UDP packet from clientIP: xxxxxxxx, Possible RecvKey: 76432614
21/12/2023 6:53:53: Error: Client UDP socket, failed to receive data from xxxxxxxxxxxx:24563: Error 0: La operación se completó correctamente.
21/12/2023 6:53:56: Download session started. User: xxxxxxx 'xxxxxxx' (eMule v0.60d,OnQueue/None/None) in SetDownloadState(). New State: 0
21/12/2023 6:53:57: Download session ended: The remote client decided to stop/complete the transfer (got OP_OutOfPartReqs). User: xxxxxxxxx 'xxxxxxxx' (eMule v0.50a,Downloading/None/None) in SetDownloadState(). New State: 1, Length: 3:36 mins, Payload: 9.29 MB, Transferred: 9.13 MB, Req blocks not yet completed: 8.
21/12/2023 6:54:13: Server, Sendlist: Packet size:122
21/12/2023 6:54:37: Download session ended: Disconnected: CClientReqSocket::Disconnect(): Close User: xxxxxxxxxxx 'xxxxxx' (eMule v0.60d,Downloading/None/None) in SetDownloadState(). New State: 1, Length: 41 secs, Payload: 0 Bytes, Transferred: 0 Bytes, Req blocks not yet completed: 1.
21/12/2023 6:54:45: Removing client from upload list: Remote client cancelled transfer. Client: xxxxxxxx 'xxxxxxxxxxxx' (aMule v2.3.3,NoNeededParts/Uploading/None) Transferred: 1:40 mins SessionUp: 3.66 KB QueueSessionPayload: 10.01 KB In buffer: 349.99 KB Req blocks: 1 File: xxxxxxxxxxxxxxxxxxx
21/12/2023 6:55:22: Kad: KADEMLIA2_RES: Search already expired, ignoring answer (sender: xxxxxxxx)
21/12/2023 6:56:00: Download session ended: NNP. You don't need any parts from this client. User: xxxxxx@xxxxxx (xxxxxxxx) 'xxxxxxxxxxxx' (aMule v2.3.1,Downloading/Uploading/None) in SetDownloadState(). New State: 7, Length: 24:50 mins, Payload: 352.54 MB, Transferred: 352.51 MB, Req blocks not yet completed: 0.
21/12/2023 6:56:53: Obfuscated packet expected but magicvalue mismatch on UDP packet from clientIP: xxxxxx, Possible RecvKey: 665391204
21/12/2023 6:56:53: Error: Client UDP socket, failed to receive data from xxxxxxxx: Error 0: La operación se completó correctamente.
21/12/2023 6:57:12: Adding client to upload list: Not enough open upload slots for the current speed Client: xxxxxxx@xxxxx (xxxxxx) 'xxxxxxxxxx' (aMule v2.3.1,NoNeededParts/None/None)
21/12/2023 6:57:34: Obfuscated packet expected but magicvalue mismatch on UDP packet from clientIP: xxxxxxx, Possible RecvKey: 1933269918
21/12/2023 6:57:34: Error: Client UDP socket, failed to receive data from xxxxxxx: Error 0: La operación se completó correctamente.
21/12/2023 6:57:38: Kad: KADEMLIA2_RES: Search already expired, ignoring answer (sender: xxxxxxxxxxxxxxx)
#147
Posted 21 December 2023 - 07:49 AM
Do you use VPN for eMule transfers?
#148
Posted 21 December 2023 - 08:29 AM
fox88, on 21 December 2023 - 08:49 AM, said:
Do you use VPN for eMule transfers?
nope never used vpn or proxy for p2p.
also, when this standby thing starts it's stuck there till i restart emule.
i also tried to increase max new connections to 40 and half-open connections to 20 without luck.
This post has been edited by Aokromes: 21 December 2023 - 08:37 AM
#149
Posted 21 December 2023 - 09:40 AM
#150
Posted 21 December 2023 - 12:04 PM
Aokromes, on 20 December 2023 - 12:18 PM, said:
eMule never reports its download speed to uploader.
According to this picture, those few bytes are 100 MB and more, and it was sent in less than a minute.
What 10 minutes you were talking about? It should have timed out much sooner.
#151
Posted 21 December 2023 - 02:52 PM
fox88, on 21 December 2023 - 01:04 PM, said:
Aokromes, on 20 December 2023 - 12:18 PM, said:
eMule never reports its download speed to uploader.
According to this picture, those few bytes are 100 MB and more, and it was sent in less than a minute.
What 10 minutes you were talking about? It should have timed out much sooner.
this i.imgur.com/NSZ6p4w.png is when it works properly, for around 10 minutes after start emule, like you see they are downloading at a sum of near 7MB/s
this i.imgur.com/XSI7LWN.png is when it bugs, like you see 130 KB on 4 minutes, this is around after 10 minutes of start of emule upload speed 54 bytes/s.
#152
Posted 22 December 2023 - 12:45 PM
#153
Posted 22 December 2023 - 06:19 PM
#154
#155
Posted 23 December 2023 - 08:18 AM
Aokromes, on 22 December 2023 - 10:58 PM, said:
This should have been said or shown in pictures instead of images where things look fine.
If upload regularly drops or becomes very unstable, then you have a support case, not a bug (the beginning of this topic has an example).
Simply to say - parameters are too high for the connection and it chokes after a short while.
Try search for an old topic from seeingATeMuleEnglishMF where she explains how to get proper settings. It is still good and valid even though some links in the message might be stale. Exception - automatic update of servers on connect, because it might require manual management of IP filter in order to keep bad servers away.
#156
Posted 23 December 2023 - 10:27 AM
fox88, on 23 December 2023 - 09:18 AM, said:
Aokromes, on 22 December 2023 - 10:58 PM, said:
This should have been said or shown in pictures instead of images where things look fine.
If upload regularly drops or becomes very unstable, then you have a support case, not a bug (the beginning of this topic has an example).
Simply to say - parameters are too high for the connection and it chokes after a short while.
Try search for an old topic from seeingATeMuleEnglishMF where she explains how to get proper settings. It is still good and valid even though some links in the message might be stale. Exception - automatic update of servers on connect, because it might require manual management of IP filter in order to keep bad servers away.
the problem is, that with 0.60d with same settings, everything works fine, nothing changed other than emule version.
i.imgur.com/LTPrPAe.png emule 0.60d running for 20 minutes every upload works fine with the same settings as emule 0.70a.
i.imgur.com/KviwKaD.png still running fine after 50 minutes
This post has been edited by Aokromes: 23 December 2023 - 11:22 AM
#157
Posted 23 December 2023 - 01:12 PM
#158
Posted 23 December 2023 - 02:58 PM
I open the software and It run very well; the search function also very well.
After some time that Emule is open if you try to search some files nothing succeed it stopped to work.
You may restart the software and then It run again.
Please fox88 can you fix this fastidious issue.
Thank you for your time.
Merry Christmas.
This post has been edited by Atomo12345: 23 December 2023 - 03:02 PM
#159
Posted 23 December 2023 - 03:08 PM
#160
Posted 23 December 2023 - 03:21 PM
Atomo12345, on 23 December 2023 - 05:58 PM, said:
Thanks, Merry Christmas to you too.
Some time - how long, and how exactly search stops working? Is there anything useful in log and verbose log?
What is the search method?
If server search, are you connected to a good server?