Official eMule-Board: Existen Listas Negras - Official eMule-Board

Jump to content


Page 1 of 1

Existen Listas Negras

#1 User is offline   marsal 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 7
  • Joined: 02-October 05

Posted 20 November 2005 - 10:30 AM

Hola, cuando me conecto al emule a un servidor cualquiera me sale el mensaje siguiente: "Your IP is currently blacklisted". Alguien sabe porque ocurre eso y como lo puedo solucionar?. Gracias
0

#2 User is offline   Ghost_Rider 

  • Estoy que ardo :-D
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 1619
  • Joined: 26-February 05

Posted 20 November 2005 - 10:56 AM

marsal, on Nov 20 2005, 12:30 PM, said:

"Your IP is currently blacklisted". Alguien sabe porque ocurre eso


Hola,

Mírate este enlace, el Cap. VI, por Tchon (Blacklisted) o este otro La lista negra, Ayuda General

Quote

y como lo puedo solucionar?


Pues no hay más forma que desconectar tu conexión (router/modem) y e-Mule y esperarte unas dos horas, a que se te vuelva a asignar una nueva IP limpia de problemas. No obstante, si te has mirado los enlaces anteriores, deberías bajar tus preferencias en la Mula, porque parece ser que, o eres muy agresivo (emulamente hablando), o por mala suerte, te ha tocado una IP baneada!.

Saludos,
0

#3 User is offline   torpon 

  • I'm so tired
  • PipPipPipPipPipPipPip
  • Group: Moderator
  • Posts: 21272
  • Joined: 20-January 05

Posted 20 November 2005 - 11:10 AM

Reproduzco una parte de Low Id y otros problemas: principales razones por Tchon

Quote

Blacklist (lista negra - baneo).

    * Estos servidores también rechazan los que hacen demasiadas peticiones a la vez. Están "baneados" (banned - blacklisted). Es frecuentemente la conjunción de varios parámetros exagerados que provoca los rechazos : número demasiado elevado de ficheros compartidos y de fuentes por fichero y demasiadas conexiones en muy poco tiempo (ver VIII).
      Actualmente, los servidores eD2K que llevan los programas de « Lugdunum » tienen un sistema de crédito de conexión a cada usuario. Su eMule tiene inicialmente un crédito de 1200 puntos pero cada acción cuesta puntos de créditos :
      - 1 crédito mínimo para cada tramo,
      - 100 créditos por petición de conexión,
      - 16 créditos por petición de fuentes por petición de fuentes para un archivo en descarga,
      - 900 créditos por petición de conexión anulada (clientes eMule que no tienen activada la opción « Conexión segura ».
      Sólo entra en créditos + 1 punto por segundo hasta el máximo de 1200 puntos.
      Si el contador de créditos llega a 0, su eMule está baneado « Blacklisted » durante un tiempo variable de 10 minutos a dos horas.
      Para más informaciones, lea -> blacklist problems in p75 en inglés o el texto original -> Blacklist (Razorback) en francés.
    * Note que muchos servidores eD2K consideran los usuarios de ciertos “Mods leechers” o de versiones antiguas de eMule como clientes agresivos y los banean.
    * ed2k://|file|Your.client.is.too.old ...
      Recibe mensajes de este tipo cuando la versión de su eMule es demasiado antigua. Los servidores la rechazan. Cambie por la versión más reciente disponible.

Estas son las razones si la culpa fuera tuya.

Como la gran mayoria de las conexiones a internet son mediante IP dinamica es relativamente facil que al conectar tu router o modem hayas recibido una IP que por algun motivo de los anteriores está incluida en la lista negra, sin que tu hayas hecho nada para merecer esa inclusion.

En ese caso tienes dos posibilidades, una esperan a que pase el periodo de baneo, que suele ser de unas dos horas inicialmente, y otra volver a desconectar tu router o modem y volverlo a conectar al cabo de un rato, con lo que en algun momento cambiara la IP que recibas. El problema de esta segunda opcion es que hay veces que al reconectarte vuelves a recibir la misma IP y no hay un tiempo establecido de espera para asegurarte que la IP cambia.

Saludos :D

#4 User is offline   fonsi2 

  • Magnificent Member
  • PipPipPipPipPipPip
  • Group: Members
  • Posts: 337
  • Joined: 15-November 05

Posted 20 November 2005 - 11:44 AM

Quote

  Recibe mensajes de este tipo cuando la versión de su eMule es demasiado antigua. Los servidores la rechazan. Cambie por la versión más reciente disponible.


Yo uso la version 0.43b, eso es malo ?
user posted image
user posted image
user posted image
user posted image
user posted image
0

#5 User is offline   torpon 

  • I'm so tired
  • PipPipPipPipPipPipPip
  • Group: Moderator
  • Posts: 21272
  • Joined: 20-January 05

Posted 20 November 2005 - 11:56 AM

Hombre si tuvieras quer pagar por ella entiendo que no quisieras cambiar de version, pero al precio que te sale...
¿Tú te quedarías con el coche que tienes, que conduces muy comodo por cierto, o llamarías para que te llevaran a casa el último modelo, con mejoras de seguridad y menos consumo de gasolina, si te lo proporcionaran gratis?

Saludos :D

#6 User is offline   p2pboss 

  • master eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 2049
  • Joined: 11-October 05

Posted 20 November 2005 - 12:04 PM

fonsi2 actualiza el emule a la 0.46c para mayor seguridad, ya que ahi se han rectificado muchos bugs y problemillas
user posted image

user posted imageuser posted image
user posted imageuser posted image

configurar con modem 56k (enlace)
Como publicar una imagen en el foro <por Asturcon3> (enlace)
Conseguir IP privada estatica <por Torpon> (enlace)
si usas un MOD del emule poco te duraran los hilos aqui... EMULE OFICIAL AQUI

Si la libertad significa algo, será sobre todo el derecho a decirle a la gente aquello que no quieren oír. "George Orwell"
0

#7 User is offline   fonsi2 

  • Magnificent Member
  • PipPipPipPipPipPip
  • Group: Members
  • Posts: 337
  • Joined: 15-November 05

Posted 20 November 2005 - 03:08 PM

El problema es que esta version comparada cin sus posteriores es la mejor en materia de Upload (soy todo un relaser :P )
La cosa es asi tengo solo un archivo en Lanzamiento, que el que quiero que sea muy compartido, luego tendre unos 10 en prioridad muy baja.
Bueno con el emule 0.43b va joya siempre estoy Uploando este archivo y a una buena tasa en paridad de subida, es decir, los que me estan subiendo en ese momento ninguno esta subiendo mas rapido o mucho menos, es parejo. Ahora con la ultima version, la cosa es muy distinta, en un principio todo bien siempre subo ese archivo, el problema es qu hay disparidad en velocidades, es decir, un usario me subre a 6 kB/s y otra 1 kB/s, cosa es muy dificil que pase con 0.43b, pero en esta pasa con mayor frecuencia. Pero lo que mas me disgusta es que, las versiones posteriores te ponen en un color gris clarito la/s subida/s del archivo/s. El problema es que me lo hace con el archivo que esta en lanzamiento y le da prioridad a los que estan en prioridad muy baja. Todo lo contrario. Que onda con vos... En conclusion la version 0.46c me hace esto:
1-Sube de manera dispar en tema de velocidades.
2-Me pone en color gris clarito el archivo en lanzamiento, dandole prioridad a los archivos que estan prioridad muy baja.
3-Se me olvidada... mi conexion, maximo soporta a la vez 5 uploads de usarios pero en esta version me llega a 7. Muy mal.
4-No me gusta que tenga que hacer doble click sobre el archivo que estoy descargando para que se me desplege, siendo en 0.43b con solo apretar adelante se me desplegan. No entiendo por lo sacaron.
5-Sigue sin reoconocer archivos *ratDVD como archivo de video.

Ahora la 0.43b
1-Seguramente tendra muchos bugs pero nunca, y lo digo de verdad me ha causado problemas, nunca un culegue, etc
2-La red Kad la pueda usar tranquilamente.
3-Excelente en materia de upload.
4-No tiene soporte UNICODE, aunque igual, los ponjas no usan programas P2P.

Salu2 ;)
user posted image
user posted image
user posted image
user posted image
user posted image
0

#8 User is offline   Bagusajalf 

  • Miembro 4stringed ♫
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 6119
  • Joined: 30-August 04

Posted 22 November 2005 - 02:58 PM

Si es para lanzar archivos concretos a la red ¿por qué no usas un Mod con Powershare o similar? :huh:

En las versiones posteriores a la que dices estar usando, basta con desactivar el USS para evitar tener "slots grises", los cuales, por cierto, sirven para asegurar bajo circunstancias que le son adversas, una subida que de otra forma se cortaría sin más.

Saludos.

[Edito: Oops! Parte de lo que acabo de escribir es erróneo. Mis disculpas, lectores... :)]

This post has been edited by Bagusajalf: 23 November 2005 - 11:06 PM

Todo lo que sube, baja ¿Tu eMule no? Lee -> Enlaces Importantes y Ayuda+Soporte
"Lee, burro: Aunque no tenga dibujos ni resultados del fútbol y no sirva para hacerse pajas." Juan Abarca
0

#9 User is offline   asturcon3 

  • Miembro con bola
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 7487
  • Joined: 26-July 04

Posted 22 November 2005 - 04:18 PM

ehm. Los 'tricky slots', vamos, las subidas en gris, no tienen nada que ver con el USS. Están siempre. Y aunque no lo parezca, aumentan el total de subida.

Corresponden a los siguientes clientes que van a ganar puesto de subida. Se establece la conexión antes de tiempo, y se mantiene un caudal mínimo simplemente para evitar que la conexión se corte. Y cuando les toca realmente descargar, el emule le quita la restricción de velocidad y pasan a la velocidad normal.

Es decir, donde en versiones anteriores tenías 4 tíos a los que subías, ahora tendrás los mismos 4, y otro par de ellos a velocidad ridícula.

La ventaja de esto, el motivo por el que se hizo, fue para evitar situaciones que se producían antes, donde terminabas la subida a alguien, elegías al primero de la cola, te ponías a conectar... y al cabo de un minuto te daba time-out porque ese ordenador lo había apagado el dueño para irse a dormir, y a elegir al siguiente. Si por un casual de la vida tus primeros, digamos, 10 clientes de la lista ya estaban desconectados, durante 10 minutos tenías la subida 3/4 de lo que podrías tenerla, porque no tenías a nadie a quien enviar ese 1/4 que te sobraba.

Vale, tú y yo quizá no lo notábamos demasiado... pero hay gente en este mundo con un par de megas de capacidad de subida, con los clientes ciclando muy rápido, y con unos hermosos picotazos hacia abajo en la gráfica de subida. Inventado esto, ya no hay problema. Cuando un cliente termina, el siguiente ya lo tenemos conectado. Abrimos el grifo, y a tope.

Parece raro al principio... pero son más megas de subida.

Ah, y me apunto a lo que dice Bagu. Si tu principal objetivo es el lanzamiento, ponte un mod con powershare. O desactiva el sistema de créditos. Con la mula oficial y el sistema de créditos activo, en cuanto inicias una descarga para tí, el emule da preferencia a los que te piden esa misma descarga. Es lo idóneo para el usuario-medio-doméstico.
Posted Image Posted Image Posted Image
0

#10 User is offline   Canalla 

  • ¡Menudo miembro!
  • PipPipPipPipPipPipPip
  • Group: Moderator
  • Posts: 6926
  • Joined: 15-August 03

Posted 22 November 2005 - 04:37 PM

Y probablemente ése sea el motivo por el que los desarrolladores del programa ofrecen la opción de desactivar el sistema de créditos. Si no fuese así, me extrañaría que hubieran puesto tantítimo cuidado en sacar adelante un programa que se lo pone realmente difícil a los "leechers" (me refiero a la versión oficial; otra cosa es que agarren los fuentes y la modifiquen) y, sin embargo, dejen abierta la puerta a inutilizar una de sus herramientas.
Non fuyades, cobardes y viles criaturas,
que un solo caballero es el que os acomete.

#11 User is offline   asturcon3 

  • Miembro con bola
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 7487
  • Joined: 26-July 04

Posted 22 November 2005 - 04:43 PM

Bueno, si realmente se lo ponen complicado a los leechers es porque, aunque cojan los fuentes y los modifiquen, no ganan nada. Mi mula les manda al fondo de la cola. Da igual lo que hagan.
Posted Image Posted Image Posted Image
0

#12 User is offline   Canalla 

  • ¡Menudo miembro!
  • PipPipPipPipPipPipPip
  • Group: Moderator
  • Posts: 6926
  • Joined: 15-August 03

Posted 22 November 2005 - 05:25 PM

Cierto. Me refería a los que aspiran a no compartir nada.
Non fuyades, cobardes y viles criaturas,
que un solo caballero es el que os acomete.

#13 User is offline   Crimsom 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 64
  • Joined: 06-November 05

Posted 22 November 2005 - 10:43 PM

Las subidas a mi me van muy bien, yo ordeno por Transferido, en la ventana de Subidas y siempre cuando alguien llega a 9 MB desaparece y entra otro. :+1:

fonsi2 said:

4-No me gusta que tenga que hacer doble click sobre el archivo que estoy descargando para que se me desplege, siendo en 0.43b con solo apretar adelante se me desplegan. No entiendo por lo sacaron.
Eso es facil de arreglar, vas a Preferencias, Mostrar y destildas la opcion Doble clic en lista para expandir y listo, ya funciona con un solo clic.

Ahora encontre unas cuantas razones para actualizar
¡Muchos bugs arreglados, muchos cambios y muchas caracteristicas nuevas! :lol:

http://vcheck.emule-project.net/en/version_check.php?version=1083 said:

Your Version: 0.43b (Hotfix) Released: 2004-07-06
Most current Version: 0.46c  Released: 2005-07-26

Status: Your version is out of date.
Security warning: Your version has known security bugs, please update!
Information: A new version is available - an update is recommended


Changelog 0.43b (Hotfix) to 0.46c

Bugfixes:


Kad now remembers Kad's last open/firewall state during the recheck process to prevent temporary false reports.
Fixed a bug which could lead to a wrong status of obtained parts for downloading clients
Update ligpng to 1.2.6 to fix security issues (which however had only minor influence on eMule)
IP Filter is now also used to ignore filtered incoming UDP packets
Fixed potential memleak in a upload client.
Fixed a bug that sends many Kad Bootstrap packets when not needed.
Fixed a bug in TryToConnect that at times could check the wrong IP/ID with the IP filter..
Fixed possible memleak if an incoming Kad publish failed.
Fixed client version statistics.
Fix a upload bug that caused uploads to stop sending after a complete chunk with a small queue. This should fix some issues with lost Friend Slots.
fixed a bug on processing the downloadlist in the webinterface
Fixed some minor bugs in file comments/ratings processing and GUI.
Fixed bug with servers which when added via ed2k link were set to low priority.
Fixed USS bug to make it survive rare occasions when no earlier ttls is pingable than the differing ttl is found.
Fixed bug that didn't resume/pause/stop all files in a category when context message for a category is used.
Small fix to make eMule request sources for files in the same order as the a4af priority (a4af auto, cat prio, file prio, alpha).
Fixed an priority bug that cause lower priority files overseed high priority files. Also hopefully lowered some cpu cycles with this change.
Fixed Unicode (Win9x) bug with wrong displayed free disk space.
Fixed Unicode (Win9x) bug with not working shared directories control.
Fixed Unicode bug with missing UTF8 conversion in web interface.
Fixed Unicode bug in main toolbar initialiation which could cause not working shortcuts.
Fixed Unicode (Win9x) issue with copying ed2k links to clipboard.
Workaround for an obvious bug in Windows DNS library which returned invalid data.
Fixed a bug which could cause resumed files (due to less disk space) get paused again immediatly.
Fixed Unicode (Win9x) bug with empty IP filter listview control.
Fixed Unicode (Win9x) bug with missing tooltips in download listview control.
Fixed the 'Run As Secure User' function
Fixed a 'Runtime Error'-crash which could appear when Kad is enabled
Fixed handling of corrupt known2.met files
Fixed a bug which let eMule temporary assume a wrong AICH hash for a partfile which was rehashed after startup
Fixed some potential problems with reading media info from files
Fixed divide by zero bug in Kad contact histogram
Fixed UploadSpeedSense UDP pinger.
Fixed alphabetical sortorder for resume next file.
The delay in creating upload slots can cause the credit system upload method to remove too many upload slots.. (fixed)
Fixed bugs in Video Preview and Archive Preview threads related to wrong file pointer usage which could create wrong temporary files for previewing (in rare situations).
Fixed Unicode bug with manually saved log files.
Fixed Unicode bug with '?' character in file comments dialog.
Fixed Unicode bug with ANSI log files which were continued in Unicode.
Fixed counter overflows for some cumulative statistics. [thx BinGordon]
Fixed bug with max. download rate. [thx ChrisV]
Fixed bug with 'Needed Spaced for Downloads' stats for NTFS compressed and sparse files.
Fixed a unicode bug in the MobileMule server
Fixed memory leaks, exception handling and tag list reading of Kad tags.
Fixed bug in some log panes which were not obeying the max. log buffer limit.
Fixed bug in client download data rate computation [thx Aw3]
Fixed default font selection for some GUI elements for locales with multibyte character fonts.
Fixed duplicate scroll bar problem in search dialog for low screen resolutions.
Fixed bug with queued thread log messages which could lead to a crash in some cases.
Fixed Unicode bug in Statistics HTML file export function.
Icons in contextmenus have been disabled for Win98/ME due to reported problems
Minor bugfix in the new corruption detector
Corrected a issue where the keyword or source index was not restored.
Fixed bug with wrong user-id/IP for http sources [thx SiRoB]
Fix a possible situation that may cause kad to not store sources.
Fixed Download List sort bug where sources could be displayed with the wrong file. (Fix by KinkyJohn)
Fixed bug with Unicode passwords in Web-interface and MobileMule-interface. Note: Your need to specify new passwords for those interfaces.
Fixed sorting bug in upload list control.
Fixed bug in client statistics for banned and IP-filtered clients.
Fixed crash with sending a message to an new added friend [thx Libbnor]
Fixed bug with wrong hashset creation in case file could not successfully read
Fixed bug with files of too large size when added via search results.
Fixed a bug in SMIRC if CHANMODES was missing from the welcome message.
Fixed a couple bugs in the hello packets for buddy information.
Fixed some GUI glitches [thx apph]
Fixed some bugs with statistics colors in Options/Statistics page.
Fixed bug with status.log file which truncated filenames to 50 chars.
Fixed Unicode bug with ed2k links added via web interface.
Fixed bug with file priority in web interface [thx CML]
Fixed a bug that could access a NULL kad buddy pointer.
Fixed crash with system tray context menu, opened preferences dialog and restored main window.
Fixed bug: Shared directory names with Unicode characters were ignored at startup.
Fixed a bug that prevented lowID clients from publishing as a source into the Kad network.
Fixed sorting bug in download list with 'Time Remaining'.
Fixed bug with vertical oriented fonts in Statistics window.
Fixed GUI glitches with context menus in Log-, Message- and IRC panes.
Fixed not working buttons in Message window
Fixed a bug related to the new kad-filecomments which would cause eMule to freeze [thx gcostanza]
Fixed a bug related to the udp-server protocol which could emule let drop packets or if malicious crafted freeze [kry]
A displaybug in the uploadwindow has been fixed
A problem which caused eMule to call the onlinehelp even if an appropriate helpfile was available has been fixed[cml]
Fixed lowercased path entries in the shared files list
Fixed issue with autoresum after file completion
Fixed secure identitfication statistics with a >100% entr
fixed removing servers from static list from the webinterface
Fixed a socket resource leak in web interface.
Fixed a bug which sometimes caused a sharing Violation in known2.met when starting eMule
Fixed: Queue Ranking of sources in Download Listview were not always updated properly.
Added some missing protocol overhead stats.
Fixed a bug which made it theortical in some rare cases possible that eMule sent unverified data to other clients
fixed not working commands on downloadlist multiselections in certain cases
Fixed bug with file comments/ratings when receiving a rating without a comment [thx MogTheCat]
Fixed bug with eD2k link parsing when no filename (or filename with just spaces) was specified in link.
Fixed bug with partfile renaming when new filename contains only spaces.
Fixed bug in keyword publishing related to filenames ending with too much unpublished characters.
Fixed some GUI glitches in Friend listview.
Fixed bug which prevented eMule to minimize to system tray.
Fixed bug with log messages which were not written to log files during early startup.
MiniMule shows accurate connection icon.
MiniMule - fixed problem with eMule installation path containing some special characters.
Fixed bug in log panes which could create auto-endless up-scrolling.
Fixed bug in log panes which displayed text too far on top if pane was first time enabled.
Fixed bug with not adding all available source found during searching when adding a file via an sub-entry to the download queue.
Fixed wrong file statistics of (previously) stopped files [Xman]
Fixed bug with too high PeerCache socket timeouts [thx so8so]
Small fix to USS to prevent it from sometimes disabling itself when network connection is lost. Once the first init of USS is complete it should now never disable itself.
Fixed issue where bugged compatible clients could receive sources for a file they did not ask for.
Fixed bug with Kad-notes which were received but not stored.
Fixed 'Transferred' column data display and sorting in Upload list control.
Fixed comment rating label order.
Fixed possible misplaced up/down buttons in details dialog.
fixed Uploading sort bug
Multi-Temp folders should work now.
Fixed Comment Icons staying when no comment/ratings are available.
Fixed several smaller glitches in the new share control
Fixed the filesizelimit for downlaoding files from the webinterface
Fixed some crashing bug with duplicated files
Fixed some minor general GUI glitches (Icons, save&restore, etc)
Fixed crash when downloading via HTTP source and viewing the downloadclient-list
Tray shutdown bug fix. [Xman1]
Fixed a bug in kad that returned the incorrect order of contacts to start a search. (thx Agthorr for finding bug)
Fixed a bug that treated all KadResults as a best result causing extra overhead. (thx Agthorr for finding bug)
Fixed a bug that removed wanted contacts in the 'possible' list during Kad searches. (thx Agthorr for finding bug)
Print '0' instead of '<0' in Complete sources column in shared files list.
Fixed possibility of accessing a deleted client object in the comment list.
Fixed a possible memleak with Kad Notes.
Possible fix for minimize to tray problem reported for Windows NT SP6.
Added a startup check for proper version of Windows Shell32 DLL - should also help folks using Windows NT!
Fixed a lowID bug that caused a lowID user to report the wrong buddy IP/Port.
Fixed bug where ED2K search results were shown in Kad search results.
Fixed bug with client software statistics where equal client numbers were not shown.
Fixed underflow error for 'Shared parts' column in Shared files list, which caused parts to sometimes be shown as light blue even when they are common in the net.
Bugfix to UploadSpeedSense (USS). Sometimes with low ping times and low Ping Tolerance settings it could get stuck at min speed.
Some modifications to avoid disapearing Search Parameters window.
Fixed bug in ZIP file archive preview for files containing a directory archive entry.
Fixed bug with SetSystemACP setting for fresh eMule installations.
Fixed wrong dealing with kBit/s and KB/s in several places.
Fixed glitches with main statusbar when using large system fonts.
Fixed bug with dropdown buttons in transfer window for large system fonts.
Fixed a crash in Message window when right clicking on Close button.
Fixed a problem with registering eD2K links to be taken by eMule.
fixed some bugs in the webinterface
fixed disabled status of the source handling submenu (selection dependend), to allow access to the submenu items
Updated to zlib 1.2.3 because of security flaws in 1.2.2
Fixed possible crash on malformed Kad packet.. (Kry)
Auto Kad bootstrap wasn't updated to work with eMule's Multipacket protocol. Fixed.
fixed bug (v0.46b) in using regular expressions as view filter in categories [thx kinmenalex]
fixed bug in checking for tempfolder when multiple folders were used, and a little splitterbar bug [tHeWiZaRdOfDoS]
Bugfix+enhancement to the code that requests less of the file from slow download sources.
Some cpu fixes for Kad. (Kry)
Collections were storing extra tags causing them to be 'bloated'.. Fixed.
fixed/improved downloading big files via webinterface

Changes:

It now takes two consecutive matching IP responses for Kad to change your current known IP to help filter bad responses.
Updated MobileMule protocol to 0.9a (bugfix)
Added a preference option to choose between simple (prio 0.43) or adanced calculation of the remaining time for downloading files
Attempt at a estimate file count in Kad.
Changed how we estimate Kad users.
Changed method of deleting Kad Contacts. Contact list should stay more up to date.
We do not save all Kad contacts on exit. Save a sample of up to 200 contacts to help lower to amount of pinging to dead contacts.
Added an option to manually add a source.
If Kad has seen no incoming traffic for a set time, it's assumed you lost your connection and will auto disconnect.
Adjusted the estimated time remaining again to hopefully get it more stable.
Reworked handling of dead sources (avoids that sources which are known to be unreachable are asked again within a certain time period)
Added a option to auto start eMule when starting windows..
Added to the statistics how many known clients are connected to ED2K and/or Kad.
We now keep track of Half Open sockets and limit new connection if Half Open sockets are too high. (If approved and kept in, it should help with SP2 and some nick cards and routers..)
We no longer allow a socket pending Connect to time out until OnConnect is called. ( If approved and kept in, it should help with SP2 and lost sources..)
Added to the statistics how many sources are connected to ED2K and/or Kad.
Added to the client details if the user is connected to Kad.
Increased time between keyword publishes to reduce overall Kad overhead.
Resume next now uses a4af order: Alphabetical order if enabled for a category, cat-prios, file-prios etc. If you select 'Resume next' in a category popup menu, it will only resume a file in that category; none if no file is paused in that category.
UploadSpeedSense min limit is now allowed to be lower than 10 KB/s (default is 1 KB/s). Please note that when UploadSpeedSense lowers the speed below 10 KB/s, the ratio download limiter will dynamically kick in until the speed goes over 10 KB/s again
improved No Needed Parts a4af management. Will now occasionally reask lower prio nnp files on a source, if all files are nnp on that file.
Did some merging from some Mods[], updating the IRC, Message and Statistics GUI updated.
Sorting of strings in UI is locale dependant (very similar to sorting order of Windows Explorer)
Download listview shows system file icons for part files.
Ctrl+V inserts ed2k-filelinks from the clipboard to the download
TCP and UDP Port can be changed during the runtime of eMule, if no server or kad connection is established an no client has been connected yet.
Show which upload slots are in standby, with status text and graying them out.
Soft queue limit at whatever entered in preferences. Hard queue limit 25% higher. When soft limit is reached, eMule only allow high credit clients, or clients that want high prio files, to get on queue.
'Try to get preview parts first' selectable on individual files if 'Try to get preview parts first' is disabled in preferences. Please note that 'Advanced mode controls' (tweak prefs) needs to be enabled for this menu option to show up.
Statistics in Shared Files window show a summary of all selected files
Added 7-zip file extension to known archive types for publishing and searching files.
Added automatic detection of system code and current codepage when eMule is started the 1st time (semi-automatic setting of SetSystemACP=1).
Added AspectRatio property to Media Info dialog.
Added verification whether file extension of downloaded/shared files matches the file format (only used with MediaInfo library installed -- see also, older change log entries according MediaInfo Lib).
Added new preferences setting 'InspectAllFileTypes=1', currently used only in MediaInfo dialog to determine the file format of downloading/shared files by evaluating the headers (most usefull when MediaInfo Lib is installed).
Added new preferences setting 'PreviewCopiedArchives=0' to use an alternate method for previewing archive files (faster, uses less disk space on temporary folder drive).
Added new preferences setting 'ShowActiveDownloadsBold=1'. Active downloading files and uploading sources are shown in bold font in Transfere window.
Changed: server.met and ipfilter.dat URLs are added to auto-completion lists even the download failed to not loose the entered URLs.
Added: When selecting multiple servers in servers list control, a tooltip is shown with summarized stats of selected servers.
Change in the source Index so it only sends the most recent entries.
Brushed up preferences dialog.
added commands (show details and add as friend) to the contextmenu for tabs in the chatwindow
view filer now available for all category tabs
imported part files will be shared immediately if possible
Reawakening of search parameters restoring. Double-Click or Ctrl+Click on Search Result tab to restore all parameters used for that particular search.
All eMule*.log files are stored in ./logs directory. Already existing log files are automatically moved there.
Reworked ID3 tag reading code for Media Info dialog to show more proper information.
Added tooltip for 'Connected' pane in status bar which shows the currently connected eD2K server and server users.
little updates in the web interface to category items, remember last used category in session, display first results on new search)
statistic graphs: added vertical marker for every hour and enlarged statistic update delay [CB mod]
added command line argument to reload ipfilter: 'emule.exe reloadipf'
The time between Kad file source reasks slowly adjusts over time to ease up on overhead and redundant results. (Let the source exchange do it's job..)
categories can be filtered by regular expressions on the filenames (as view filter)
middle mouse click closes tabs (messagewnd, irc, search results)
coloring of search results customizable via skin
automatic category assignment can now also be done by regular expression rules
Navigation in the file detail- and client detail dialog: up/down buttons allow scrolling through the items within the current list
We now use load balancing on publishes. If we publish a keyword to a section of network that has a high load, we increase delay for the next republish time. These times are also carried between restarts of the client.
Changed: Amount of uploaded/downloaded data to/from a client shows the raw (compressed) data size (which is also used for credits).
Added 'Extract Meta Data' setting to enhanced options dialog.
Ping/Pong system added for buddies to prevent stalled buddy connections.
Added default creation of 'skins' subdirectory in eMule application folder which will be used as default directory for eMule Skins and Toolbar bitmaps.
-added language Breton - translated by KAD-Korvigelloù an Drouizig
Added sorting of context menu entries for toolbar bitmaps and skin profiles.
Shared files which have a user comment and/or user rating attached are displayed with a small additional overlay icon in Shared Files window.
Added icons for network share information column in Shared Files window.
Added some double-click shortcuts.
Improvements to download throttler to lower amount of timed out/failed download sessions.
Added Unicode search parameter to web interface [thx CML]
Local hostname (if specified in ext. settings) is used for web interface URL shown in MyInfo.
Force a node lookup when it appears Kad may be disconnected to verify if we are really disconnected.
Firewalled Kad users will instantly look for a new buddy when it loses it's current buddy instead of waiting for next firewall check.
Changed the Kad search list to show info clearer and to add the Node Load column.
File format of 'shareddir.dat' and 'adresses.dat' changed to Unicode. Old (ANSI) files are read and converted to Unicode automatically at startup. Previous (ANSI) eMule versions can not read those files any longer.
Added startup check for proper version of COMCTL32.DLL.
Merged debug dump build into release build. To enable crash dump generation, specify 'CreateCrashDump=1' in 'eMule' section of preferences.ini file.
All packets received from eD2K servers can contain Unicode strings. (Server admins can announce their server's description in Unicode).
Reworked 'Startup Minimized' and main window restoring after startup to avoid some window redrawing problems.
Reworked eMule Main toolbar
Preferences.ini setting ShowCopyEd2kLinkCmd=1 replaces 'Show eD2K Links' command with 'Copy eD2K Links'
Searching in eD2K and Kad is now defaulted to use Unicode search expressions.
File comments dialog in Shared Files window can be invoked for multiple files.
The downloadwindow now remembers the 4 last sort orders and uses them as secondary sort orders
Added eMail-Notification settings to the GUI, optional encryption still needs to be configured in the preferences.ini
Added the setting for alternate toolbar layout in the transferwindow into the preferences dialog
Access to web interface can be restricted to a list of specified IP addresses. preferences.ini setting 'AllowedIPs=[;]' section '[WebServer]'
Renamed 'adresses.dat' to 'addresses.dat' for automatic serverlist updates on startup. Renaming will be done automatically during startup on this upgrade.
Remembering downloaded files can be disabled and eMule will purge all unneeded records from known.met and known2.met
Implemented protocol change for server for getsources (local/udp) suggested by lugdunum
Couple very small gui changes to the setup wizard and file comment list.
Merged the view selector and the downloadingclients view from Mods [TBH]
added manual filename cleanup on selected files in the downloadlist by pressing Ctrl+F2
To reduce overal network overhead, dead servers are detected faster and not used for UDP sources and file searches until they are deleted.
The priority specified in downloaded server.met files is ignored. Server priorities can still be used for the local server list.
Sortorder and scrollposition are now saved for every open searchresult when switching between them
Source base is compiled with warning level 4 (and corrected)
Kad keyword searching and publishing of short words changed to circumvent some limitations for Asian phrases.
Brushed up Shared Folders context menu in Options/Files.
Changed all sound creating functions to not use the PC-speaker in case there is no sound card available.
Log files clearly show session start/end messages.
MiniMule shows the nr. of completed downloads currently available in Download list.
MiniMule can be properly attached to each edge of the desktop window (depending on taskbar position).
Added optional Text-To-Speech notification. For each generated notification eMule will 'read' the log message in the system's default Text-To-Speech engine.
Added support GZip compressed IP-filter files.
Disabled extracting of MetaData with DirectShow - until a more reliable way is implemented.
Experimental: Added a more efficient method to reject TCP connections of filtered and/or banned clients; see Options/Ext. settings
All graphs in Statistics window have a different appearance when 'StraightWindowStyles=1' is specified in Preferences.ini, section [emule].
Couple of optimizations in drawing the statistics graphs.
When closing the Options dialog, the preferences.ini file is saved only if really needed.
Searchresult panes: When switching to/from panes with collapsed search entries, the state is properly saved/restored.
Couple of optimizations in search result handling.
When receiving different file names for a search result, the filename with the highest availability is eventually used for showing the result
In ext. user mode only: Search results show nr. of complete sources by percent and accurate number.
Filename cleanup: dont uppercase character behind apostrophe
Set file based sources limit via downloadlist context menu (when extended controls enabled)
moving mouse over statisticgraphs and holding down left mousebutton will display a tooltip containing the corresponding date and time at the current mouseposition in the graph (calculated by the CURRENT statistic settings)
Reworked all dialogs to properly show the '&' characters in filenames.
Upgraded to zlib 1.2.2.
Experimental: Added Right-to-Left reading support. Enable in Preferencs.ini: Section=[eMule]; Setting=RTLWindowsLayout=
Collection Names more relaxed for the users.. (ie: It doesn't reformat the name or remove tags)
Lowered number of stores to help with routers.
Some users complained that the 'Users | Files' box wasn't large enough for their lang. Double clicking that box now pulls up MyInfo with user/file counts included.
Added some extra info to the full screen MyInfo box. (Parts based on Morph mod)
Removed 'Automatically Swap All (A4AF) Sources To This File' menu item. For the same effect, raise download priority on the file instead. See Web Help&Support -> Features -> Source Management
When downloading from a really slow source, request less of the file at a time. This locks less of the file, so if there's a faster source available we have a better chance of downloading from it even when the file is almost completely downloaded.
Improved Collection Gui.
Collections are now properly signed/verfied. If verifying failes, the authorname and key are removed
Downloadrequests for collections will bypass the downloadqueue and served immediately
Added splitter control to the shared files window
Changed the apperearence of the splitter slightly
Collection files can now be linked to eMule, click the 'Take ED2k-links' Button to do so, if not already done by the installer
Extended the 'Run as unprivleged User' function: If starting with the eMule-Account fails (for example because of lacking privileges)
minimule shows now count of all completed files, in all categories [by TED]
Kad Notes (Comments from the Kad network) are now filtered like normal comments.
Converted all comment Lists to Mule Style Lists. (Do to sync issues, sorting doesn't work yet..)
16 color support added. (eMule will now look better when viewing it with remote desktop at 16 color display.)
During a KadRequest, we now sort the contacts in the bin based on the target first to make sure we send the best results.
splitterbar for the serverwindow
reworked dialog lists setup save&restore
webinterface links changed to be relative
FileDetailDialog is now used for all CListCtrl that deals with files.
Added support for MediaInfo library versions 0.5.1 and 0.6.0 (http://mediainfo.sourceforge.net)
Added support for previewing encrypted RAR files and RAR files with 'solid' compression.
All Comment lists auto refresh.
Added comment icon into sharedfile lists.
Comments found in search results are carried over into the download list.
Can view comments to more then one file at the same time.
Added support for previewing RAR files which contain extended date/time file information.
Added the ability to view comments (Kad Notes) on search results. (Find out what people think of the file before downloading..)
Added the ability to view comments (Kad Notes) for your shared files. (Find out what people think of your files..)
MiniMule shows the nr. of completed downloads currently available in Download list only if 'Autoclear completed downloads' is disabled. If 'Autoclear completed downloads' is enabled, it shows the nr. of completed files in the current session.
USS now detects when max ul limit is raised in prefs, and goes into 'fast reaction mode' for a short while to quickly find out if it can raise the limit.
Slightly changed colors in 'Shared parts' (fka 'Obtained parts') column in shared files list
Added new functions for PreviewApps.dat file.
Added new tooltips for Transfers window.
filesize limit of fileupload via webinterface can now be set in the preferences.ini, Section [WebServer] : 'MaxFileUploadSizeMB=5' (or 0 for no limit)
Changed: Notifier.ini file is by default searched in eMule config folder.
Added missing middle mouse button handling to transfere windows [thx SiRoB]
Added .cbz and .cbr file extension to ed2k/kad archive file type and previewable archive types.
Added new macros to webservices
Improved a4af code to work better for No Needed Part sources. Earlier code could make a source get stuck on a high prio NNP file even if there were other files (with lower prio) that weren't NNP.
Servers with a failure count of >= 2 or with a failure count which exceeds the specified one are shown in gray shades in server list control
'Add Source' dialog and 'Add Friend' dialog: the IP and port optionally can be specified right in the IP control.
show filespecific source limit in downloadlist [] (if modified) and in the filedetails dialog
Added support for MediaInfo DLL versions 0.6.1 and 0.7.x [Thx to Zenitram]
new and changed category incoming directories will now appear in the new shared files control
The upload limit and capacity as well as the downloadlimit will now be set to unlimited by default
When the uploadcapacity is set to unlimited (0), USS will be automatically enabled to determinate the best uploadspeed
If using the prio default capacity (16KB), the new version will reset it (one time) to the new default unlimited
UploadSpeedSense will at most raise speed 30 KBytes/s above current upload speed.
Resizeable collection windows
Changed how we maintain contacts for kad.
Kad node lookup algo modified to use far less overhead with better results.

Features:

Added new Dialogpage for creating ED2K Links with of shared and downloading files (replaces old context menue entries)
Introduced additional new hashsystem (AICH Hashs) which will reduce the average amount of dataloss when a part is corrupted
Due to the additional hash algorithm, eMule has to rehash all your shared files - this is a one-time thing, which can't be avoided.
First phase in adding firewall user support for Kad. This support will not work well until most users upgrade within the Kad network..
Added 'Network Info' dialog. Double click on connection icon in statusbar to open it.
Added Kad contact histogram control.
added port-checker. Integrated into the first-start-wizard and the connection preferences, you can start a port test. A webscript will check your eMule and display results and hints on your browser.
eMule supports now Unicode
eMule is now able to detect which clients sent corrupt data and bans those if a threshold is reached (based on AICH)
Added icons to most contextmenus [thanks Daan for providing the icons]
Added support for NTFS sparse files for new created part files.
Optimized MD4 and SHA1 hashing code to a total increase of hashing performance by 50% [thx Camper(Shareaza)]
Added:Errors/Warnings/Success messages are shown in log panes with dedicated colors.
Added 'Notes' for kad. Currently used to store file comments.. (Will not work until a majority of users upgrade.)
category view filters more flexible
Added new Mini eMule window with basic stats and functions. Single click in eMule System Tray icon to open it.
eMule now (optional) remembers files which were cancelled and marks them in the searchresults
Added new drop down buttons in Transfers window to select different view types for main and sub window.
Added support for new PeerGuardian IP filter file format v2.
Added E-Mail notification for 'Download finished' and 'Important Error' eMule notifications.
merged webinterface from eMule+, adapted, did some fixes and added: Kad-window, show comments & ratings download of completed files via browser (up to 5MB filesize)
Basic Collection framework and gui (see documentation for detailed information on this)
Added new control into the Shared Files window which lets you browser your shared files by directories and add/remove shared directories
Added support for Related File-Search into the Search window (contextmenu). This allows you to search for files which are shared by users which also shared the selected file [lugdunum]
Ratings icons now show a range of ratings based on the average total instead of just good/bad.
added support of multiple tempfolders (to seperate by | ). A tempfolder out of several is selected when adding a download, depending on the incomingfolder (category) and most free space. (temppath can not (yet) be changed lateron)

0

#14 User is offline   asturcon3 

  • Miembro con bola
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 7487
  • Joined: 26-July 04

Posted 22 November 2005 - 10:46 PM

Bah, total, a quién le importan 351 razones :lol:
Posted Image Posted Image Posted Image
0

#15 User is offline   p2pboss 

  • master eMule
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 2049
  • Joined: 11-October 05

Posted 22 November 2005 - 11:24 PM

mejor seria traducirlo pa que la peña se aclare mejor :+1:

This post has been edited by p2pboss: 22 November 2005 - 11:25 PM

user posted image

user posted imageuser posted image
user posted imageuser posted image

configurar con modem 56k (enlace)
Como publicar una imagen en el foro <por Asturcon3> (enlace)
Conseguir IP privada estatica <por Torpon> (enlace)
si usas un MOD del emule poco te duraran los hilos aqui... EMULE OFICIAL AQUI

Si la libertad significa algo, será sobre todo el derecho a decirle a la gente aquello que no quieren oír. "George Orwell"
0

#16 User is offline   fonsi2 

  • Magnificent Member
  • PipPipPipPipPipPip
  • Group: Members
  • Posts: 337
  • Joined: 15-November 05

Posted 23 November 2005 - 12:00 AM

Quote

Quote

4-No me gusta que tenga que hacer doble click sobre el archivo que estoy descargando para que se me desplege, siendo en 0.43b con solo apretar adelante se me desplegan. No entiendo por lo sacaron.

Eso es facil de arreglar, vas a Preferencias, Mostrar y destildas la opcion Doble clic en lista para expandir y listo, ya funciona con un solo clic.


No lo que yo digo es que apretas la tecla direccional adelante y se te desplega el archivo, eso.

--

Ahora he testeado algunos MODs pero ninguno que llego a comvencer, el que mas se acerco a mi fue el Phoenix (no me acuerdo la versio) pero el problema es que no me reconocia los creditos que tenia en ese momento y tampoco el archivo known.met, a su vez tambien testee otras versiones Phoenix pero tampoco. Asi que me sigo quedando con mi Mula version 0.43b :D
user posted image
user posted image
user posted image
user posted image
user posted image
0

#17 User is offline   asturcon3 

  • Miembro con bola
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 7487
  • Joined: 26-July 04

Posted 23 November 2005 - 12:07 AM

fonsi2, on Nov 23 2005, 01:00 AM, said:

No lo que yo digo es que apretas la tecla direccional adelante y se te desplega el archivo, eso.


Usa el + y el - del teclado numérico.

This post has been edited by asturcon3: 23 November 2005 - 12:07 AM

Posted Image Posted Image Posted Image
0

#18 User is offline   fonsi2 

  • Magnificent Member
  • PipPipPipPipPipPip
  • Group: Members
  • Posts: 337
  • Joined: 15-November 05

Posted 23 November 2005 - 01:16 AM

asturcon3, on Nov 23 2005, 12:07 AM, said:

fonsi2, on Nov 23 2005, 01:00 AM, said:

No lo que yo digo es que apretas la tecla direccional adelante y se te desplega el archivo, eso.


Usa el + y el - del teclado numérico.
View Post


Funciona de verdad en la 0.46c ?

--

Ta bien me paso a la 0.46c cuando Speedy vuelva a regalar potencia de subida (o sea nunca mas :cry: )
user posted image
user posted image
user posted image
user posted image
user posted image
0

#19 User is offline   asturcon3 

  • Miembro con bola
  • PipPipPipPipPipPipPip
  • Group: Members
  • Posts: 7487
  • Joined: 26-July 04

Posted 23 November 2005 - 01:17 AM

fonsi2, on Nov 23 2005, 02:14 AM, said:

asturcon3, on Nov 23 2005, 12:07 AM, said:

fonsi2, on Nov 23 2005, 01:00 AM, said:

No lo que yo digo es que apretas la tecla direccional adelante y se te desplega el archivo, eso.


Usa el + y el - del teclado numérico.
View Post

Funciona de verdad en la 0.46c ?
View Post

Claro. Probado justo antes de poner el mensaje, porque no recordaba si era + y -, o el enter, o la barra espaciadora. Era el + y -.

(se nota que hace mucho que no presto demasiada atención al emule... siempre lo manejaba entero por teclado, pero para eso hace falta práctica)

Saludos :)
Posted Image Posted Image Posted Image
0

#20 User is offline   Crimsom 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 64
  • Joined: 06-November 05

Posted 23 November 2005 - 03:10 AM

p2pboss said:

mejor seria traducirlo pa que la peña se aclare mejor :+1:
No puedo traducir todo pero mira esta es la unica parte en rojo de todo el changelog:

http://vcheck.emule-project.net/en/version_check.php?version=1083 said:

Aviso de seguridad: Su versión tiene problemas de seguridad conocidos, por favor actualizar!
Por si no kedo claro esta en rojo! y tiene un signo de admiracion! Ademas no solo problemas de seguridad, tambien tiene muchisimos bugs ke hacen mal tanto a tus descargas como a tus subidas por mal envio de informacion. Algunos errores son muy serios, haciendo ke pierdas tanto contactos como archivos mal escritos.
Es tu decision, lo unico ke te pido es ke trates de leer no solo los bugfixes sino tambien los cambios en el funcionamiento de emule. Si aun asi seguis pensando igual segui con la misma version.
0

  • Member Options

Page 1 of 1

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users