Kmule Build20130705/build20160211 Beta The First Kad Only Mule
#501
Posted 28 February 2016 - 10:20 PM
The amount of files that it has indexed since my last post isnt many.
#502
Posted 28 February 2016 - 10:26 PM
#503
Posted 29 February 2016 - 04:43 AM
Simultaneous indexing actions seems suspect.
Hmm, silly question but is it possible that they arent hashed?
I just unshared 3 files and hit reload and it said hashing 24 new files. It didint add any new files.. Seems to hash 24 files every time I hit reload.
This post has been edited by Sir_Boagalott: 29 February 2016 - 10:07 AM
#504
Posted 02 April 2016 - 06:26 AM
I tried to use the last beta but I found some issues when I try to change the ports setting.
let me explain, I can change the ports from the setting panel but the changes are not correctly saved.
I'm behind a old firewall with static NAT, so I have to set up manually the TCP and UDP ports and disable UPNP service.
it's a bug?
#505
Posted 27 April 2016 - 02:50 AM
I use the version 20160211........... i have a 1024Kb in upload and i have set upload to 128Kb and limited to 80KB/s........... apparently i can pass all test whit ports (i use 27200 and it's corrected open on my router) but i launch Kmule, i see this connected whitout problems but apparently after about 20/30 minutes i see the KAD connection goes like firewalled!
The smiley face it's no more green but now it's yellow and on task manager i can see the icon whit a little wall on front!
I close kmule...... restart and the smiley face back to green............ after about another 30 minutes goes again yellow!
I have disabled the firewall of my Windows 7...... i have Avira but the kmule.exe it's on exclusion (i have the free version whitout web protection otherwise)...........
Someone can suggest how i can check on my configuration ?
#506
Posted 28 May 2016 - 11:40 AM
Hello could add my idea to your eMule?
Start upload speed!
reserve 1 slot for client 0% priority! to receive the first chunk faster
Help propagate file as your conclusion!
Idea is that we can help people get fast file. I appreciate your understanding!
thank you
#507
Posted 28 May 2016 - 07:27 PM
Clients can fake their upload statues, i.e. they will say they don't have anyting of the file to get the slot.
#508
Posted 28 May 2016 - 09:07 PM
See this as an improvement for ed2k of health, because that network must be slow when we can improve some aspects that brought more benefits than losses! Could add extra code to rare file for example would not be too bad's supposed!
A thinker perhaps variable % ? I know there "spread CREDIT SLOT" but it is not the same!! There are many similarities.
#509
Posted 29 May 2016 - 04:14 AM
5/28/2016 7:41:19 PM: Download session started. User: xxx.xx.1xx.xx '{lJFrGAj} Jerome [ARHJde]' (eMule v0.50a [kMule Build20130705],OnQueue/None/None) in SetDownloadState(). 5/28/2016 7:41:23 PM: Download session ended: The remote client decided to stop/complete the transfer (got OP_OutOfPartReqs). User: xxx.xx.1xx.xx '{lJFrGAj} Jerome [ARHJde]' (eMule v0.50a [kMule Build20130705],Downloading/None/None) in SetDownloadState(). New State: 1, Length: 4 secs, Payload: 0 Bytes, Transferred: 0 Bytes, Req blocks not yet completed: 3. 5/28/2016 8:10:15 PM: Download session started. User: xxx.xx.1xx.xx '(lJFrGAj) Jerome [ARHJde]' (eMule v0.50a [kMule Build20130705],OnQueue/None/None) in SetDownloadState(). 5/28/2016 8:10:16 PM: Download session ended: The remote client decided to stop/complete the transfer (got OP_OutOfPartReqs). User: xxx.xx.1xx.xx '(lJFrGAj) Jerome [ARHJde]' (eMule v0.50a [kMule Build20130705],Downloading/None/None) in SetDownloadState(). New State: 1, Length: 0 secs, Payload: 0 Bytes, Transferred: 0 Bytes, Req blocks not yet completed: 3. 5/28/2016 8:39:16 PM: Download session started. User: xxx.xx.1xx.xx '{lJFrGAj} Jerome [ARHJde]' (eMule v0.50a [kMule Build20130705],OnQueue/None/None) in SetDownloadState(). 5/28/2016 8:39:17 PM: Download session ended: The remote client decided to stop/complete the transfer (got OP_OutOfPartReqs). User: xxx.xx.1xx.xx '{lJFrGAj} Jerome [ARHJde]' (eMule v0.50a [kMule Build20130705],Downloading/None/None) in SetDownloadState(). New State: 1, Length: 0 secs, Payload: 0 Bytes, Transferred: 0 Bytes, Req blocks not yet completed: 3. 5/28/2016 9:08:18 PM: Download session started. User: xxx.xx.1xx.xx'{lJFrGAj} Jerome [ARHJde]' (eMule v0.50a [kMule Build20130705],OnQueue/None/None) in SetDownloadState(). 5/28/2016 9:08:18 PM: Download session ended: The remote client decided to stop/complete the transfer (got OP_OutOfPartReqs). User: xxx.xx.1xx.xx '{lJFrGAj} Jerome [ARHJde]' (eMule v0.50a [kMule Build20130705],Downloading/None/None) in SetDownloadState(). New State: 1, Length: 0 secs, Payload: 0 Bytes, Transferred: 0 Bytes, Req blocks not yet completed: 3.
I cannot figure out why and how this happened, not make any sense to me at least.
Edit: I'd suspect this is some kind of new leecher mod based on kMule.
This post has been edited by Enig123: 29 May 2016 - 04:22 AM
#510
Posted 30 May 2016 - 07:59 AM
#511
Posted 02 December 2016 - 04:07 PM
1. I have unchecked "minimize to system tray" into the option but kMule still minimize to tray when I press "minimize" button. I use Windows 10 Home.
2. Italian DLL don't work (download / use)
3. Can I turn off the autoupdate for "nodes.dat", "modicon", "mediainfo dll", ecc.. in the .INI file?
Edit this links is safe for kMule operation?
THANKS!
This post has been edited by guknos: 02 December 2016 - 04:08 PM
#512
Posted 02 December 2016 - 08:29 PM
2. It does - but only for stable versions, beta versions don't get updates.
3. Yes. Simply set the appropriate lines in kMule.ini to 0
nodes.dat will always be automatically downloaded if needed.
#513
Posted 02 December 2016 - 11:01 PM
tHeWiZaRdOfDoS, on 02 December 2016 - 08:29 PM, said:
2. It does - but only for stable versions, beta versions don't get updates.
3. Yes. Simply set the appropriate lines in kMule.ini to 0
nodes.dat will always be automatically downloaded if needed.
hello dear Wiz,
1. fox88 builds fix this issue (if you need some reference or so) :)0.50b BETA1 from SS have this issue (If I understand correctly kMule beta is based on this version)
2. okay
3. okay
regards
#514
Posted 11 December 2016 - 11:00 AM
host image
server ?
This post has been edited by guknos: 11 December 2016 - 11:00 AM
#515
Posted 12 December 2016 - 04:34 PM
#516
Posted 23 December 2016 - 03:54 AM
I was using Beba and it was close my full upload limit but I wanted to give Kmule a try. Using USS with default settings I was able to hit ~400KB/s max and "Lowest Allowed Speed" set to 3000 I touched 1k for a bit.
With it off I get around 440.
Am I missing something here to use all of my upload pipe limit?
Thanks
This post has been edited by DiCE1904: 23 December 2016 - 04:03 AM
#517
Posted 23 December 2016 - 10:05 PM
#518
Posted 23 December 2016 - 10:50 PM
Today its worse and wont break 200KB.s for some reason hmmm. Also having an issue with kMule reporting firewalled and then after a few hours going back to not firewalled then firewalled again.
Update:
Did a fresh install of windows and just got the kMule beta without installing any other versions. Set USS to on with "Lowest allowed upload speed: 2500"
Im now getting a steady 1600-2200KB/s up after its been running for a few hours.
This post has been edited by DiCE1904: 25 December 2016 - 01:51 AM
#519
Posted 07 January 2017 - 06:40 PM
You should be able to see what USS does in Verbose log and also in the bottom right corner in the main window.
#520
Posted 30 July 2017 - 02:08 PM
#define XTREME_ADDON L" «" + m_strModVersion + L"»"be careful when using utf-8 /public/style_emoticons/default/biggrin.gif