This post has been edited by Svampen: 08 December 2011 - 09:14 PM
[Solved] Windows 7 Blocking All Ports - No Firewall, No Router (Comodo was the problem..)
#1
Posted 04 December 2011 - 05:33 PM
#2
Posted 04 December 2011 - 06:28 PM
Or have you stopped the win firewall/ics service?
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#3
Posted 05 December 2011 - 09:29 AM
xilolee, on 04 December 2011 - 08:28 PM, said:
Or have you stopped the win firewall/ics service?
First I "turned the firewall off" and then disabled it from the services. My Internet Connection Service (ICS) is also disabled. I also tried alternating between "Home" and "Public" network types, but no effect.
I just tested with Comodo turned off completely (disabled service also) and turned the Windows firewall ON, allowed eMule - still LowID / ports blocked. Previously I had also tested with Comodo AND Windows Firewall completely disabled.
I'm using the exact same ports as with XP and with the XP comp I can still get a HighID no problem.
This post has been edited by Svampen: 05 December 2011 - 10:28 AM
#4
Posted 05 December 2011 - 11:06 PM
If you want to completely turn off the win firewall, you can try later (when you'll get high-id) reading this qm2003's post (click)
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#5
Posted 06 December 2011 - 07:53 AM
xilolee, on 06 December 2011 - 01:06 AM, said:
If you want to completely turn off the win firewall, you can try later (when you'll get high-id) reading this qm2003's post (click)
In Windows 7, those are two different services. When I try to start ICS, it says the service "started and then stopped. Some services stop automatically if they are not in use by other services or programs." However, I doubt ICS is relevant here.
I get a LowID when trying without firewalls, but with Windows Firewall service enabled.
Re: qm2003's post, there is no "IP network address translator" in Windows 7.
This post has been edited by Svampen: 06 December 2011 - 08:04 AM
#6
Posted 07 December 2011 - 06:10 PM
1) Make sure you know how to reset (to factory defaults) your device and note down the data for connecting to your ISP.
(in case of troubles, you can reset the router and you'll need those data - vpi - vci - username and password of your connection, and so forth... these data are personal/private, you_SHOULD_NOT_post_them_here --- ONLY you should know them).
2) name of your ISP, name of your connection and, possibly, downstream and upstream bandwiths
3) How many servers do you have into your list and where do you get them from?
4) Manufacturer and model of your router?
5) Describe how your devices are arranged.
example:
- telephone jack - adsl filter - ethernet modem - router - 3 pc (1 wireless, 2 wired)
6) How many pcs are using p2p programs (emule or others) and which ports they are using.
7) Screenshots of your router menus are welcome:
- UPNP
- DHCP
- virtual server/port forwarding or similar
- eventual firewall screen (of your router)
8) Have you put static ip to your pc (into tcp/ip properties of your connection properties)?
Here too, a screenshot would be welcome.
9) Which firewalls/antiviruses are present/installed on your pc?
10) Are you using peerguardian/peerblock/ip filters or similars? And what of those?
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#7
Posted 07 December 2011 - 07:48 PM
IP is not static.
As I mentioned, I have Comodo, but have tested without it. I have also Peerblock, but have tested without it and it should of course be enabled.
I'm currently on my XP machine, eMule has a HighId.
This post has been edited by Svampen: 07 December 2011 - 07:50 PM
#8
Posted 08 December 2011 - 10:20 AM
Edit: ahh.. I can't, but if some moderator wants, he can add [SOLVED] and "Comodo driver was guilty" or something!
This post has been edited by Svampen: 08 December 2011 - 10:21 AM
#9
Posted 08 December 2011 - 11:36 AM
I think you should be able to edit your first post, using full editor.
cheers
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#10
Posted 08 December 2011 - 02:20 PM
However: I seem to have a problem with connecting to the KAD network! Port test launched from eMule says my UDP port is also open, but KAD just remains disconnected. And this was also when I had uninstalled Comodo completely (and when I boot into Safe Mode).
This post has been edited by Svampen: 08 December 2011 - 02:23 PM
#11
Posted 08 December 2011 - 02:29 PM
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!