[southern comfort]

Problems with emule.
Hi every one
WHAT HAS HAPPENED TO EMULE,for the last month my upload speed has been 0.2 - 2.4 and my down load speed 0.0
my ports are open and no problems,router config correct, even changed ports again tonight, still the same.I have a high id 4092884185 , i have even disconected router and back to my old system.but no change.lets get a new virtion quick as i have read many other conplaints regarding the same problem

[southern comfort]

Emule sucks at the moment, well for a while now, I have had very little down load ,about 2mb in a week, give 16+ upload, can never get onto razorback, allways YOU HAVE A LOWID, SERVER FULL, BULLSHITtested ports all ok, even changed ports 1007 tcp 1009 udp as sean in suggestions to others with the same problem, up loads change sometimes 0.1 then upto 3., down load 0 , shows some one down loading to me , still 0. and no change in the down load, all ports do work as i have tried to change the limit of down load to no limit, get up , up loading 138. down loading 2. for a few seconds then 0. for a while, then continue 0. up load to 16. what the f*** is this virtion, no probs betore, using emule since started, edonkey before, so no beginner,being ass fucked i think have re-installed computor and left out sp2 as i have heard something about that, still no change, get a new virtion out ASAP, many have the same problem ,just read the forums, go back to basics, get it right and addmit you fucked up here

[birk]

You really expect people to give you a straight answer to that rant? High ID in one post and Low ID in the next.

[southern comfort]

Hi Souther Comfort here . for the past 3 days i have been attact by ither a sever of emule or a user, i cant seam to get on my usaul server ( razorback, says low id ect full) you know the crap so i have been using donkey server no3 , i get attacks every second when not loged onto emule( attempt to connect to local computer using Silence Trojan Horse ) ip 80.26.152.--port 4337. i have blocked many in norton block, but keep changing ip source, but still same person.Any ideas as to kill the rat

proof Rule "Default Block Silencer Trojan horse" blocked (209.91.186.5,1001).
Inbound TCP connection
Local address,service is (BRIAN-PLKGNJPCY(192.168.1.1),1001)
Remote address,service is (209.91.186.5,3007)
Process name is "N/A"
Rule "Default Block Silencer Trojan horse" blocked (82.34.218.74,1001).
Inbound TCP connection
Local address,service is (BRIAN-PLKGNJPCY(192.168.1.1),1001)
Remote address,service is (82.34.218.74,2133)
Process name is "N/A"
Rule "Default Block Silencer Trojan horse" blocked (212.76.241.30,1001).
Inbound TCP connection
Local address,service is (BRIAN-PLKGNJPCY(192.168.1.1),1001)
Remote address,service is (212.76.241.30,4569)
Process name is "N/A"
Rule "Default Block Silencer Trojan horse" blocked (83.23.135.152,1001).
Inbound TCP connection
Local address,service is (BRIAN-PLKGNJPCY(192.168.1.1),1001)
Remote address,service is (83.23.135.152,4337)
Process name is "N/A"
Rule "Default Block Silencer Trojan horse" blocked (193.77.246.248,1001).
Inbound TCP connection
Local address,service is (BRIAN-PLKGNJPCY(192.168.1.1),1001)
Remote address,service is (193.77.246.248,3839)
Process name is "N/A"

[Log edited in lenght by birk!]

Rule "Default Block Silencer Trojan horse" blocked (212.160.186.130,1001).
Inbound TCP connection
Local address,service is (BRIAN-PLKGNJPCY(192.168.1.1),1001)
Remote address,service is (212.160.186.130,1115)
Process name is "N/A"
Rule "Default Block Silencer Trojan horse" blocked (80.235.57.102,1001).
Inbound TCP connection
Local address,service is (BRIAN-PLKGNJPCY(192.168.1.1),1001)
Remote address,service is (80.235.57.102,28761)
Process name is "N/A"
Rule "Default Block Silencer Trojan horse" blocked (212.204.32.4,1001).
Inbound TCP connection
Local address,service is (BRIAN-PLKGNJPCY(192.168.1.1),1001)
Remote address,service is (212.204.32.4,7056)
Process name is "N/A"
how can i stop him, its getting on my nerves.

This post has been edited by birk: 24 December 2004 - 12:39 PM

[snapper26]

um i would like to ask if u start to download something, and then exit emule, can u resume ?

[SirXerxes]

Yes. And it's done automatically, and all the time, even when you don't close eMule, simply because eMule does not download files sequentially (from the beginning to the end).

[weirderkendra]

ok i think i must be dense i have read the FaQ and most of the rest of the main site i have looked through the frums and i still not got any luck i havent got a problem with high or low id i got high and regulary down load at 60 kb/s but in the system tray my emule icond had a black bar that seams to be getting bigger now i dont know what this means and can find no reference to in in the site so has anyone got any ideas???

[niclights]

You mean a vertical bar, to the right-hand side of the mule?

That just shows that you are downloading - the higher the bar, the faster the download!

[SirXerxes]

Just disconnect your internet connection and this thing will go away.

[niclights]

that's what I meant to say....

[BARRY6521]

Sara4, on Sep 28 2004, 10:21 AM, said:

ok

first thing thanks,
but I figured it out... it was not my firewall.. It turns out that I'm on a natted connection, so I guess I just have to live with a low ID.
Are there other p2p's that work with natted connections??

whats a natted connection?

[niclights]

NAT = Network Address Translation, another word for Port Forwarding, usually in a table form.

natted = incorrect verb form.....

[buxboy]

hi all please help me, i can connect to the ed2k but the kad part of it doesnt connect any suggestions thanx

[thelocalzero]

i dont have a router and i added the ports to my firewall's exception list...and i still have a low id. when i test the ports it still tells me the TCP test failed. ive read all the help things at the mule website about low id and its not working....help please?

[shwnhill]

I have been using emule forawhile and have encountered a severe problem that I hope is easy to fix. After a download is finished it starts over and does not convert the file from a part file toa media file. What the heck happened? I hope I dont have a virus. I have never had any problems before.

[Cerebrus99]

Hi all,

I have a question... When I'm downloading a file, and I right click on the entry and click "File Details..." and go to the "FileName" tab, it often lists files under "Sources names", that are completely incongruous with what I am downloading.

For instance, if I'm downloading a movie file (.avi), it might list some source files as being a game file, or a document file. Initially I thought that it could either be that I'm getting a wrong file, or that those people have the wrong file. But when I see comments by those people saying that "...Very good game" or some such thing, it gets confusing, since most of the sources in the list will show it as what I'm downloading (A video file in this example).

Can anyone explain this ? Since every file has a unique Hash, how can someone who has a game file, transfer a video file to me ?

Thanks,

Cerebrus

[niclights]

You answered your own question without realising it. Every unique file has a unique hash. Therefore filenames are irrelevant. What you are downloading 'may' be the file you think you are downloading or may be one of the others listed.

Why people deliberately rename the files is another matter..

[Cerebrus99]

So, in other words, NicLights, one can't really trust the Filenames that are listed. But then what can you trust ? Speaking from your considerable experience, how do you decide if a large file that you are downloading is not really a fake ?

Thanks,

Cerebrus

[niclights]

From the manual:

Quote

How do I know that a file is a fake?
You can easily recognize fakes by looking at the found filenames. Right click on any download -> Show File Details -> File Name or middle mouse button opens a list of all found file names for a download. If the file names differ a lot or are contradicting it is probably a fake. Search results showing an explorer style + also have different file names found.

[Cerebrus99]

Hmmm... I gotcha ! Thanks a lot !

And I thought I had read the manual completely ! You guys must have "Some" memory to remember Every thing mentioned in there. LOL !