[049xxv]

some info as following

eD2K Network
Status: Connected
IP:Port: 220.173.91.63:6000
ID: 1062972892
High ID

eD2K Server
Name: eDonkeyServer No2
Description: www.eDonkey.to
IP:Port: 212.63.206.35:4242
Version: 17.15
Users: 349,819
Files: 31,418,865
Connection: Normal

Kad Network
Status: Firewalled
UDP Status: Firewalled
IP:Port: 220.173.91.63:7000
ID: 3702348607
Buddy: None

The following is ports' test :

Testing IP: 220.173.91.63 (220.173.91.63)

Starting TCP connection test...

TCP test successful.

Now testing UDP...
Sending UDP packet...
Waiting for result...
UDP test failed!




I don't know what to do with it...

more info :
KIS 2012 firewall (port 6000/7000 firewalled)
router (UPnP enabled
7000 192.168.0.55 7000 UDP 0 eMule UDP
6000 192.168.0.55 6000 TCP 0 eMule TCP )

Thanks for helping !

[SS1900]

the ports test isn't reliable ! you'd better have a high ID .

[049xxv]

SS1900, on 25 July 2011 - 02:28 PM, said:

the ports test isn't reliable ! you'd better have a high ID .

Thank u , it's solved after trying other ports.

No difference between these ports at all !

The test isn't reliable...

[ScottP]

Just in case this helps the next victim of this problem:

I had the same basic symptom: "TCP test successful" and "UDP test failed".

I've been using the same set-up for a very long time, but just replaced my Wifi access point and had made some other changes to my home network set-up, so I assumed that I had misconfigured something. Took forever checking and testing and .... NOTHING. Very frustrating.

Finally, on the strength of the previous posts here, I decided to change my eMule client to change from using port 5662 to port 7662 (for both UDP and TCP, emule and kad). Exited and restarted eMule .... works perfectly.

The bug seems to be in eMule as well as in the connection test, because both the test failed and eMule Kad wouldn't connect. The obvious guess would be that the port number being tested and used is (under some condition) not the port number that is written in the Options-->Connections box. By giving a new number, it is reset to be what is written. (Just trying to be helpful in case a dev is reading this. This was real annoying.)

-scott