Official eMule-Board: Aiuto Definitivo Per Configurazione Emule-tiscali Pirelli - Official eMule-Board

Jump to content


Page 1 of 1

Aiuto Definitivo Per Configurazione Emule-tiscali Pirelli quando tutto sembra perduto.

#1 User is offline   KennetParker 

  • Newbie
  • Pip
  • Group: Members
  • Posts: 2
  • Joined: 11-November 08

Posted 11 November 2008 - 07:16 PM

Aiuto definitivo per configurazione emule
Ringrazio anticipatamente chi vorrā o potrā aiutarmi.

ho seguito le guide ma emule mi assegna sempre id basso
e non si connette proprio alla rete kad

Situazione
emule 0.49
Adsl Tiscali 4 mega con router voip pirelli
Ip del pc 192.168.1.2
Ip del Router (e gateway) 192.168.1.1

Configurazioni fatte sul router pirelli
LAN Settings:
LAN IP 192.168.1.1 (quello del router)
IP subnet mask: 255.255.255.0
DHCP server: disabled

NAT Settings
Enable or disable NAT module function : Enable

Nat
Virtual Server
No.1
LAN IP Address:192.168.1.2 (quello del pc)
Protocol Type: TCP
LAN Port 4662 (la stessa su emule)
Public Port: 4662
Port Enable

No.1
LAN IP Address:192.168.1.2 (quello del pc)
Protocol Type: UDP
LAN Port 4672 (la stessa su emule)
Public Port: 4672
Port Enable

HO IMPOSTATO LE REGOLE SU COMODO FIREWALL (Ma i problemi sono identici anche se disattivo il firewall)
Regola 1
Action = Allow
Protocol = TCP
Direction = In
Description = Regola per il Protocollo TCP in Entrata
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = la porta TCP di emule

Regola 2
Action = Allow
Protocol = UDP
Direction = In
Description = Regola per il Protocollo UDP in Entrata
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = la porta UDP di emule

Regola 3
Action = Allow
Protocol = TCP or UDP
Direction = Out
Description = Regola per il Protocollo TCP and UDP in Uscita
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = A port range = (start port = 1025 / end port = 65535)

Regola 4
Action = Allow
Protocol = ICMP
Direction = Out
Description = Ping ai server
Source Address = Any
Destination Address = Any
ICMP Details = ICMP Echo Request


Regola 5
Action = Ask (attivate l’opzione Log as a firewall event if this rule is fired)
Protocol = TCP
Direction = Out
Description = Regola per le richieste HTTP
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = 80

Regola 6

Action = Block (attivate l’opzione Log as a firewall event if this rule is fired)
Protocol = IP
Direction = In/OUT
Description = Blocca e registra tutte le richieste che non corrispondono
Source Address = Any
Destination Address = Any
IP Details = Any

Su emule il problema si presenta sia con che senza offuscamento.
ed anche se disattivo il firewall Comodo
Ovviamente il test delle porte di emule fallisce.

Dove sta il problema?
E' tiscali che non va o devo cambiare ancora qualcosa?

Grazie a chi mi vorrā aiutare!

Piero
0

#2 User is offline   xilolee 

  • eMule 0.50b BETA1 user
  • PipPipPipPipPipPipPip
  • Group: Italian Moderators
  • Posts: 7983
  • Joined: 20-August 08

Posted 13 November 2008 - 04:50 PM

39403"]come ottenere id alto (cliccami!)

leggi qui per bene e dicci come va, ciao :D
INCONCEIVABLE! - You keep using that word. I do not think it means what you think it means.
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa! Immagine Postata
0

  • Member Options

Page 1 of 1

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users