Aiuto definitivo per configurazione emule
Ringrazio anticipatamente chi vorrā o potrā aiutarmi.
ho seguito le guide ma emule mi assegna sempre id basso
e non si connette proprio alla rete kad
Situazione
emule 0.49
Adsl Tiscali 4 mega con router voip pirelli
Ip del pc 192.168.1.2
Ip del Router (e gateway) 192.168.1.1
Configurazioni fatte sul router pirelli
LAN Settings:
LAN IP 192.168.1.1 (quello del router)
IP subnet mask: 255.255.255.0
DHCP server: disabled
NAT Settings
Enable or disable NAT module function : Enable
Nat
Virtual Server
No.1
LAN IP Address:192.168.1.2 (quello del pc)
Protocol Type: TCP
LAN Port 4662 (la stessa su emule)
Public Port: 4662
Port Enable
No.1
LAN IP Address:192.168.1.2 (quello del pc)
Protocol Type: UDP
LAN Port 4672 (la stessa su emule)
Public Port: 4672
Port Enable
HO IMPOSTATO LE REGOLE SU COMODO FIREWALL (Ma i problemi sono identici anche se disattivo il firewall)
Regola 1
Action = Allow
Protocol = TCP
Direction = In
Description = Regola per il Protocollo TCP in Entrata
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = la porta TCP di emule
Regola 2
Action = Allow
Protocol = UDP
Direction = In
Description = Regola per il Protocollo UDP in Entrata
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = la porta UDP di emule
Regola 3
Action = Allow
Protocol = TCP or UDP
Direction = Out
Description = Regola per il Protocollo TCP and UDP in Uscita
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = A port range = (start port = 1025 / end port = 65535)
Regola 4
Action = Allow
Protocol = ICMP
Direction = Out
Description = Ping ai server
Source Address = Any
Destination Address = Any
ICMP Details = ICMP Echo Request
Regola 5
Action = Ask (attivate lopzione Log as a firewall event if this rule is fired)
Protocol = TCP
Direction = Out
Description = Regola per le richieste HTTP
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = 80
Regola 6
Action = Block (attivate lopzione Log as a firewall event if this rule is fired)
Protocol = IP
Direction = In/OUT
Description = Blocca e registra tutte le richieste che non corrispondono
Source Address = Any
Destination Address = Any
IP Details = Any
Su emule il problema si presenta sia con che senza offuscamento.
ed anche se disattivo il firewall Comodo
Ovviamente il test delle porte di emule fallisce.
Dove sta il problema?
E' tiscali che non va o devo cambiare ancora qualcosa?
Grazie a chi mi vorrā aiutare!
Piero
Page 1 of 1
Aiuto Definitivo Per Configurazione Emule-tiscali Pirelli quando tutto sembra perduto.
#2
Posted 13 November 2008 - 04:50 PM
INCONCEIVABLE! - You keep using that word. I do not think it means what you think it means.
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
Page 1 of 1