Need Help (low Id) port forwarding
#1
Posted 20 July 2006 - 12:07 AM
#2
Posted 20 July 2006 - 01:55 AM
It might be referred to as NAT (Network Address Translation)
The concept is to take the two ports defined in options/connection and forward them from the outside world (WAN/Global IP - usually dynamic and obtained automatically by router) to your Emule machine (LAN/Local IP).
#3
Posted 20 July 2006 - 03:26 PM
#4
Posted 21 July 2006 - 01:10 AM
On reading datasheet I see
Quote
Perhaps your router is currently in a mode that does not allow port forwarding? I think you need to read the manual and figure it out. It does say it "supports 'advanced' gateway configuration...including port triggering", which is very similar to forwarding. Port Triggering is not recommended for Emule but the fact that it mentions this should mean it also supports forwarding.
#5
Posted 21 July 2006 - 03:38 AM
1. DHCP Server
2. No Server Allowed: Disabled
3. is on NAT MODE
Don't know if any of these settings is not making me see port forwarding, if so i don't even have the choice of disable or enable any settings.
#6
Posted 21 July 2006 - 04:55 AM
#7
Posted 21 July 2006 - 04:57 AM
#8
Posted 21 July 2006 - 07:00 AM
#9
Posted 06 August 2006 - 03:54 PM
#10
Posted 21 February 2009 - 10:37 AM
Try this
Username: admin
Password: cableroot
this allowed me to access port forwarding and much much more
#11
Posted 07 January 2012 - 06:44 AM
alogicsocold, on 21 February 2009 - 06:37 AM, said:
Try this
Username: admin
Password: cableroot
this allowed me to access port forwarding and much much more
Hi,
How can you access back the modem setup pages after changing it to bridge mode?