[loweherz]

Hi there,

Since I started using an ADSL Airmax Pikatel router I received a low id.

Am using eMule Plus, please help.

What I did:
* forwarded router to ports mentioned as default in emule
* gave proper authorizations to program/ports in the firewall
* made sure built in Windows firewall is off
* do not have blocked ports / problems with the ISP

Things worked fine (with cable) untill I used this new router/ISP.

Any ideas are much appreciated.

Thank you,
Lowe

[xilolee]

re-control your router/ip static/firewall/antivirus

you could try with these operations(after you have got a reliable server list):

reliable server list:
http://forum.emule-p...mp;#entry984532

now, with other programs p2p closed:

plan A
1)you should disable your fw/av
2)close/restart emule
3)if id is high, you can set fw/av


plan B-1
if you don't want to port forward your router:
1)you should disable your fw/av when you tempt to set the router.(and only in that case)
2)you should control if upnp is enabled in the router (if not, you enable it)
3)you should use upnp in option connection, close/restart emule...
4)if id is high, you should give permission to "framework upnp" (and to emule) on your fw/av, after you enable it/them

plan B-2
if you want to port forward your router:
1)uncheck "use upnp.." in option connection
2)you should disable your fw/av when you tempt to set the router.(and only in that case)
3)if you have many pcs, you should set RIGHT (and different) static ip on all pcs
4)if your router doesn't accept static ip, you should also disable dhcp option in the router
5)put your emule ports and your internal ip in router virtual server
6)save ALL router settings and restart the router(and pc)
7)if id is high, you should give permission at your fw/av (to emule), after you enable it/them
note 1: if you have 2 emule, you should use 4 different ports, 3 emule --> 6 ports ... and so on
note 2: if you don't navigate on internet but emule works, try your dns'ISP
note 3: in general, you should control your ips aren't in conflict (with dhcp setted on, it is possible)
note 4: i believe is more sure first to disable dhcp and then to put ip static....
note 5: if you have other program p2p, you make sure they have different ports.


BUT, if your isp is a wi-fi/w-lan/hyperlan/wimax/satellite/umts/....?? connection , you'll never be able to open ports...

good luck !!

[Nissenice]

loweherz, on Sep 17 2008, 04:24 PM, said:

Am using eMule Plus, please help.

Well, here we are using eMule v0.49b. So, I guess the first thing you have to do is to decide which client you wanna use.