This post has been edited by grenadier: 16 September 2008 - 02:57 AM
Emule Stuck 'connecting' After Upgrading To Vista Ultimate
#1
Posted 16 September 2008 - 02:56 AM
#2
Posted 16 September 2008 - 05:40 AM
you could try with these operations(after you have got a reliable server list):
reliable server list:
http://forum.emule-p...mp;#entry984532
now, with other programs p2p closed:
plan A
1)you should disable your fw/av
2)close/restart emule
3)if id is high, you can set fw/av
plan B-1
if you don't want to port forward your router:
1)you should disable your fw/av when you tempt to set the router.(and only in that case)
2)you should control if upnp is enabled in the router (if not, you enable it)
3)you should use upnp in option connection, close/restart emule...
4)if id is high, you should give permission to "framework upnp" (and to emule) on your fw/av, after you enable it/them
plan B-2
if you want to port forward your router:
1)uncheck "use upnp.." in option connection
2)you should disable your fw/av when you tempt to set the router.(and only in that case)
3)if you have many pcs, you should set RIGHT (and different) static ip on all pcs
4)if your router doesn't accept static ip, you should also disable dhcp option in the router
5)put your emule ports and your internal ip in router virtual server
6)save ALL router settings and restart the router(and pc)
7)if id is high, you should give permission at your fw/av (to emule), after you enable it/them
note 1: if you have 2 emule, you should use 4 different ports, 3 emule --> 6 ports ... and so on
note 2: if you don't navigate on internet but emule works, try your dns'ISP
note 3: in general, you should control your ips aren't in conflict (with dhcp setted on, it is possible)
note 4: i believe is more sure first to disable dhcp and then to put ip static....
note 5: if you have other program p2p, you make sure they have different ports.
BUT, if your isp is a wi-fi/w-lan/hyperlan/wimax/satellite/umts/....?? connection , you'll never be able to open ports...
good luck !!
This post has been edited by xilolee: 16 September 2008 - 05:43 AM
come ottenere aiuto italian guides - guide della sezione italiana
italian support - sezione italiana scaricare la lista server
ottenere id alto impostare le porte nel router
recuperare file corrotti i filtri ip
Sembra talco ma non č serve a darti l'allegrIa! Se lo lanci e poi lo respiri ti dā subito l'allegrIa!
#3
Posted 16 September 2008 - 08:24 PM
EDIT: Using a computer connected to a hub (10+ PC's) connected to a router connected to a modem - this was never a problem before and all the router settings appear to be correct.
EDIT 2: Still failing eMule's 'test ports' test.
This post has been edited by grenadier: 16 September 2008 - 08:38 PM
#4
Posted 16 September 2008 - 09:58 PM
To connect KAD: queue a file with high number of sources (like 50 or more), and then mark From known clients and press Bootstrap
This post has been edited by fox88: 17 September 2008 - 06:56 PM
#5
Posted 16 September 2008 - 11:06 PM
#7
Posted 17 September 2008 - 07:48 PM
fox88, on Sep 16 2008, 05:58 PM, said: