Help Pls!
#1
Posted 12 January 2008 - 03:43 PM
in years that I use EM I never was really satisfied in ports config.
Always used different routers, never had a direct connection, but only via Lan (I haven't a direct modem)-
The only firewall I have in my PC is Windows XP firewall.
So never know if my ID is low because:
- of my PC firewall (but the result seems unchaged once I fully deactivate firewall to test EM).
- my router (which is not listed in EM Help)
- an eventual firewall in my router
HELP me! I'm not so expert indeed!
My OS is XP Pro, and router is Atlantis Router ADSL 2+
From EM instructions: I open the LAN, add new port to Exceptions, type 4662 for TCP, 4771 for TCP and 4672 for UPD,
there is no place where to type the suggested 127.0.0.1, just call them with descriptions (eg. EM_TCP)
already added the full EM program to exceptions
In router I'm only able to enter in Config / Firewall / add new rule.. but here start the troubles
"drp/forward" "ingoing/outgoing" "from/to" again "from/to" my IP or router IP.. for me impossible to understand
so show a couple of images (I guess my router is really complicated!)
please see http://emmro.blogspot.com/
Thanks a lot!
#2
Posted 12 January 2008 - 04:46 PM
Cheers
Reglas del foro Reglas de cortesía
Configuración de varios cortafuegos Conseguir una Lista de servidores limpia y fiable
La torpeza en la persona grandes males proporciona
Siervo de la gleba de la extinta Republica de Kjersti
#3
Posted 13 January 2008 - 01:00 AM
#4
Posted 13 January 2008 - 01:14 AM
Cheers
Reglas del foro Reglas de cortesía
Configuración de varios cortafuegos Conseguir una Lista de servidores limpia y fiable
La torpeza en la persona grandes males proporciona
Siervo de la gleba de la extinta Republica de Kjersti
#5
Posted 13 January 2008 - 02:02 AM
torpon, on Jan 13 2008, 02:14 AM, said:
Cheers
Tks my friend
could you check in http://emmro.blogspot.com/
if now written correctly?
I don't think so, because again Low ID
and
1) IP address should be my IP?
2) which should be DMZ IP?
#6
Posted 13 January 2008 - 03:24 AM
Run IPCONFIG from command prompt and use the IP Address shown there.
#7
Posted 13 January 2008 - 10:08 AM
niclights, on Jan 13 2008, 04:24 AM, said:
Run IPCONFIG from command prompt and use the IP Address shown there.
YEEEAAAHHH! Thanks a lot to all of you!
Now the port test is working!
(Nod antivirus selected EM exclusion, firewall same..)
still low id but probably depends on some software.. what is good is that now works.
HAPPY NEW YEAR TO BOTH OF YOU
now (after reboot) it says High ID.. it's the first time I read such comment!
unluckily still download is just 2 to 3 K permanent.. and never been so slow
This post has been edited by MRO: 13 January 2008 - 11:38 AM
#8
Posted 13 January 2008 - 11:59 AM
What server, name and ip, are you connected to?
How many servers in your list?
Cheers
Reglas del foro Reglas de cortesía
Configuración de varios cortafuegos Conseguir una Lista de servidores limpia y fiable
La torpeza en la persona grandes males proporciona
Siervo de la gleba de la extinta Republica de Kjersti
#9
Posted 13 January 2008 - 06:07 PM
torpon, on Jan 13 2008, 12:59 PM, said:
What server, name and ip, are you connected to?
How many servers in your list?
Cheers
Thanks again
for clear and quick understanding please see my blog (my method to show you images)
which repeat is same as above posts http://emmro.blogspot.com/
there are 4 pictures that explain you all, statistics, down and upload, server
just click on them to enlarge images
I've 16 objects in download, average speed is not more than 2K
setup is 600 download and 150 upload (I've Tele2 ADSL 4 mega flat)
the server: I don't know which server is better,, if you have any suggestion, welcomed!
eD2K Rete
Stato: Connesso
IP:Porta: 83.176.116.197:4662
ID: 3312758867
ID Alto
eD2K Server
Nome: !! Saugstube !!
Descrizione: www.usenet.1a.to
IP:Porta: 193.138.221.214:4242
Versione: 17.15
Utenti: 594,805
File: 53,384,457
Connessione: Normale
Kad Rete
Stato: Connesso
IP:Porta: 83.176.116.197:4672
ID: 1404073157
Compagno: Nessuno
WebServer
Stato: Attivo
0 Sessioni attive
URL:
Tks again
Mauro
This post has been edited by MRO: 13 January 2008 - 09:36 PM
#11
Posted 14 January 2008 - 09:53 AM
niclights, on Jan 14 2008, 12:46 AM, said:
Guessed this! Tele2 isn't an ADSL provider, but a closet!
And pls which could be the correct setup for Tele2? I'm considering to change ISP (already had in mind, but here in Italy providers take very very long time from "burocratic request" to change the plug, end so on, also a couple of months):
Tele2 unfairly promises 4 mega, but most of time their're as slow as a 56k modem, or worst.. with average of one time every two days the line disappear.. for one hour, one day.. nobody can say..
infact I stopped to pay them: it's a damage, not an ISP
I suggest to set as a 1 mega brandwidth, what do you think about?
tks
This post has been edited by MRO: 14 January 2008 - 10:50 AM
#12
Posted 14 January 2008 - 02:03 PM
Cheers
This post has been edited by torpon: 14 January 2008 - 02:04 PM
Reglas del foro Reglas de cortesía
Configuración de varios cortafuegos Conseguir una Lista de servidores limpia y fiable
La torpeza en la persona grandes males proporciona
Siervo de la gleba de la extinta Republica de Kjersti
#13
Posted 14 January 2008 - 03:00 PM
Assuming these are kB (Kilobyte/sec) I doubt you have that much upload with your 4 Mega flat contract...
#14
Posted 14 January 2008 - 03:01 PM
MRO, on Jan 14 2008, 10:53 AM, said:
niclights, on Jan 14 2008, 12:46 AM, said:
Guessed this! Tele2 isn't an ADSL provider, but a closet!
And pls which could be the correct setup for Tele2? I'm considering to change ISP (already had in mind, but here in Italy providers take very very long time from "burocratic request" to change the plug, end so on, also a couple of months):
Tele2 unfairly promises 4 mega, but most of time their're as slow as a 56k modem, or worst.. with average of one time every two days the line disappear.. for one hour, one day.. nobody can say..
infact I stopped to pay them: it's a damage, not an ISP
I suggest to set as a 1 mega brandwidth, what do you think about?
tks
Suppongo intendessi dire che Tele2 è un cesso?
Però durante l'intervallo 12.00 p.m. - 8.00 a.m. dovrebbe andare spedito: media Dl/Ul 120/16 Kb/s. Se non è così ti conviene ricontrollare -e magari verificare che non ci siano problemi "a monte".
#15
Posted 14 January 2008 - 03:42 PM
benuz, on Jan 14 2008, 04:01 PM, said:
MRO, on Jan 14 2008, 10:53 AM, said:
niclights, on Jan 14 2008, 12:46 AM, said:
Guessed this! Tele2 isn't an ADSL provider, but a closet!
And pls which could be the correct setup for Tele2? I'm considering to change ISP (already had in mind, but here in Italy providers take very very long time from "burocratic request" to change the plug, end so on, also a couple of months):
Tele2 unfairly promises 4 mega, but most of time their're as slow as a 56k modem, or worst.. with average of one time every two days the line disappear.. for one hour, one day.. nobody can say..
infact I stopped to pay them: it's a damage, not an ISP
I suggest to set as a 1 mega brandwidth, what do you think about?
tks
Suppongo intendessi dire che Tele2 è un cesso?
Però durante l'intervallo 12.00 p.m. - 8.00 a.m. dovrebbe andare spedito: media Dl/Ul 120/16 Kb/s. Se non è così ti conviene ricontrollare -e magari verificare che non ci siano problemi "a monte".
già, è un cesso.. più esattamente io l'ho definito in inglese "una latrina".. rende di più l'idea
in Veneto, poi, ed in particolare nella mia area, è come un lassativo (scusa l'espressione, ma siamo veramente disgustati)
ti confermo che la velocità è qualcosa di deplorevole: anche due giorni senza linea, poi la misuri e ti dà un "full".. non fai in tempo a dire che a tele2 hanno messo la testa a posto.. zac! conviene spegnere il router ed usare un vecchio modem a 56 k.. anche 28 andrebbe bene
è la qualità del servizio che non vale, anzi è un danno.. soprattutto se ci devi lavorare quando sei a casa (come me).. fluttua da picchi molto bassi a zero assoluto, non è stabile, non garantisce velocità minime.. in pratica ho riepilogato tutto in "latrina"
#17
Posted 15 January 2008 - 05:49 AM
#18
Posted 15 January 2008 - 09:10 AM
the Doctor, on Jan 14 2008, 04:46 PM, said:
I've one more question (sorry):
in temp files there are two "01 part" and "02 part" that are
impossible to defrag (defrag shows these two big files as "not opened")
slow down all: it seems that EM is not using them as temporary
what does this mean? they're not "met"
#19
Posted 15 January 2008 - 01:39 PM
If there is no .met file it is an orphaned download, and unless you have a clue what download it belongs to you might as well delete it.
If the limited windows defragmantation program cannot defragment it, you can move the file to a different holographic storage area, defragment the free space, and move it back. It will cost you more time to do than a fragmented disk cost, but it will cure the fragmentation for a day or 2.
To go bald where no helpdesk has gone before.
And please report back to sickbay after curing your problem. Other patients may be helped by this as well.
If you note errors in my help please keep in mind that my holomatrix can get defects due to bad prolonged interaction. In other words, shut of the EMH when leaving the topic.
#20
Posted 15 January 2008 - 04:50 PM
the Doctor, on Jan 15 2008, 02:39 PM, said:
If there is no .met file it is an orphaned download, and unless you have a clue what download it belongs to you might as well delete it.
If the limited windows defragmantation program cannot defragment it, you can move the file to a different holographic storage area, defragment the free space, and move it back. It will cost you more time to do than a fragmented disk cost, but it will cure the fragmentation for a day or 2.
Thanks a lot Doctor! I'll do so.